450W Laser-ka Jarjaraha (Qaabka Weyn)
▶ Qalab-jare Laser ah oo Weyn oo loogu talagalay Jarjaro Adag
Xogta Farsamada
| Goobta Shaqada (W * L) | 1300mm * 2500mm (51” * 98.4”) |
| Barnaamijka | Barnaamijka Offline-ka ah |
| Awoodda Laydhka | 450W |
| Isha laysarka | Tube Laser-ka CO2 ee Galaaska |
| Nidaamka Xakamaynta Farsamada | Kubbadda Kubbadda & Adeegga Matoorka Wadista |
| Miiska Shaqada | Miiska Shaqada ee daab mindi ama malab |
| Xawaaraha ugu Badan | 1~600mm/s |
| Xawaaraha Dardargelinta | 1000~3000mm/s2 |
| Saxnaanta Goobta | ≤±0.05mm |
| Cabbirka Mashiinka | 3800 * 1960 * 1210mm |
| Danabka Hawlgalka | AC110-220V±10%，50-60HZ |
| Habka Qaboojinta | Nidaamka Qaboojinta iyo Ilaalinta Biyaha |
| Deegaanka Shaqada | Heerkulka:0—45℃ Qoyaan:5%—95% |
| Cabbirka Xirmada | 3850mm * 2050mm * 1270mm |
| Miisaanka | 1000kg |
Naqshadeynta Tilmaamaha ee 500W Laser-ka Jarjaraha (Qaabka Weyn)
Bog weyn oo ku saabsan wax soo saarka
◾ Tayada Jarida oo Xasilloon & Aad u Fiican
Naqshad Waddo Aragtiyeed oo Joogto ah
Iyada oo la adeegsanayo dhererka wadada indhaha ee ugu fiican, iftiinka laysarka ee joogtada ah meel kasta oo ka mid ah baaxadda miiska jarista ayaa keeni kara in si siman loo jaro walxaha oo dhan, iyada oo aan loo eegin dhumucda. Thanks to that, waxaad ka heli kartaa saameyn jaritaan oo ka wanaagsan acrylic ama alwaax marka loo eego wadada laysarka ee nus-duulaya.
◾ Hufnaan iyo Saxnaan Sare
Nidaamka Gudbinta Waxtarka leh
Module-ka boolal-ka saxda ah ee X-axis iyo boolal-ka kubbadda ee hal dhinac ah ee Y-axis waxay bixiyaan xasillooni iyo saxnaan aad u fiican dhaqdhaqaaqa xawaaraha sare ee gantry. Marka lagu daro matoorka servo, nidaamka gudbinta wuxuu abuuraa hufnaan wax soo saar oo heer sare ah.
◾ Cimri Waara & Adeeg Dheer
Qaab-dhismeedka Farsamada ee Xasilloon
Jidhka mashiinka waxaa lagu dahaadhay tuubo laba jibbaaran oo 100mm ah waxaana lagu daweeyay gabowga gariirka iyo daawaynta gabowga dabiiciga ah. Madaxa la jarayo iyo madaxa la jarayo waxay isticmaalaan aluminium isku dhafan. Qaabeynta guud waxay hubisaa xaalad shaqo oo deggan.
◾ Habaynta xawaaraha sare
Xawaaraha Sare ee Jarida & Xardhida
Jaristayada laser-ka ee 1300 * 2500mm waxay gaari kartaa xawaaraha qorista 1-60,000mm / daqiiqo iyo xawaaraha jarista 1-36,000mm/daqiiqo.
Isla mar ahaantaana, saxnaanta booska ayaa sidoo kale lagu dammaanad qaaday gudaha 0.05mm, si ay u jari karto oo u qori karto tirooyin ama xarfo 1x1mm ah, gebi ahaanba dhibaato ma leh.
Maxaad u dooranaysaa MimoWork Laser
Isbarbardhigga Faahfaahinta Mashiinka Laser-ka 130250 Qaabka Weyn ee 450W
|
| Soo-saareyaasha kale | Mashiinka laysarka MimoWork |
| Xawaaraha jarista | 1-15,000mm/daqiiqo | 1-36,000mm/daqiiqo |
| Xawaaraha xardhida | 1-15,000mm/daqiiqo | 1-60,000mm/daqiiqo |
| Saxnaanta booska | ≤±0.2mm | ≤±0.05mm |
| Awoodda laysarka | 80W/100W/130W/150W | 100W/130W/150W/300W/500W |
| Waddada laysarka | Waddada laysarka nus-duulimaadka ah | Waddo indho-indheyn oo joogto ah |
| Nidaamka Gudbinta | Suunka gudbinta | Matoorka Adeegga + Boorka Kubadda |
| Nidaamka wadista | Darawalka tallaabada | Matoorka Adeegga |
| Nidaamka xakamaynta | Nidaamkii hore, oo iib ah, ayaa ka baxay | Nidaamka cusub ee xakamaynta RDC ee caanka ah |
| Naqshad koronto oo ikhtiyaari ah | No | CE/UL/CSA |
| Jidhka ugu muhiimsan | Fuse-ka alxanka dhaqameed | Sariirta la xoojiyay, qaab-dhismeedka guud waxaa lagu dhejiyay tuubo laba jibbaaran oo 100mm ah waxayna martaa da'da gariirka iyo daaweynta gabowga dabiiciga ah. |
Muunado Laga soo bilaabo 450W Qaabka Weyn ee Laser-ka Goynta Qoryaha
Alaab alwaax ah oo ku habboon
MDF, Basswood, White Pine, Alder, Cherry, Oak, Baltic Birch Plywood, Balsa, Cork, Cedar, Balsa, Alwaax Adag, Plywood, Alwaax, Tiin, Veneers, Walnut, Alwaax adag, Alwaax Laminated ah iyo Multiplex
Codsiyada ballaaran
• Alaabta guriga
• Calaamado
• Astaanta Shirkadda
• Xarfaha
• Alwaax-shaqayn
• Looxyada Dhimista
• Qalabka
• Sanduuqa Kaydinta
• Moodooyinka Dhismaha
• Qurxinta Dahaarka Sagxadaha
▶ 500W Qalab-jare Laser ah oo Weyn
Ikhtiyaarada Cusboonaysiinta ee aad dooran karto
Madaxa Laser-ka Isku-dhafan
Diiradda Otomaatiga ah
TheKamarada CCDwaxay aqoonsan kartaa oo ku dhejin kartaa qaabka acrylic-ga daabacan, taasoo ka caawinaysa jarista laysarka inay si sax ah u fuliso jarista tayada sare leh. Naqshad kasta oo sawireed oo la habeeyey oo la daabacay waxaa si dabacsan loogu farsameyn karaa iyadoo la raacayo nidaamka indhaha, iyadoo door muhiim ah ka ciyaareysa xayeysiinta iyo warshadaha kale.
Iyada oo la adeegsanayo casriyeyntan casriga ah, waxaad kor u qaadi kartaa awoodda laysarka ee mashiinkaaga ilaa 600W oo cajiib ah, taasoo kuu oggolaanaysa inaad si fudud u jarto agab xitaa ka dhumuc weyn oo adag. Tuubadayada Laser-ka ee la cusboonaysiin karo waxaa loogu talagalay inay si fudud u rakibto, taasoo la macno ah inaad si dhakhso leh oo fudud u cusboonaysiin karto mashiinkaaga jarista laysarka ee jira iyada oo aan loo baahnayn wax-ka-beddello adag oo waqti qaadanaya. Tani waxay ka dhigaysaa xal ku habboon ganacsiyada raadinaya inay kordhiyaan awooddooda wax-soo-saarka oo ay ballaariyaan adeegyadooda kala duwan. Markaad ku cusboonaysiiso Tuubada Laser-ka ee la cusboonaysiin karo, waxaad awoodi doontaa inaad jarjarto noocyo kala duwan oo agab ah oo leh saxnaan iyo saxnaan. Hadday tahay inaad ka shaqaynayso alwaax, acrylic, bir, ama agab kale oo adag, tuubadayada laser-ka ayaa ku habboon hawsha. Wax-soo-saarka awoodda sare leh waxay la macno tahay in xitaa agabka ugu dhumucda badan si fudud loo jari karo, taasoo ku siinaysa dabacsanaan iyo kala duwanaansho weyn shaqadaada.
