Etsa mekhabiso ea Keresemese ea Laser
Mekhabiso e tloaelehileng ea lepolanka ea laser e khaola keresemese
Ena ke nako ea likopano tse monate le ho hlahisa boqapi ba hau!Haeba u lehlohonolo ho ba le lisebelisoa tsa mochini tseo u nang le tsona, u se u le mohato o le mong pele ho papali.Amohela moea oa matsatsi a phomolo ka mesebetsi ea matsoho e monate e hapang maikutlo a tebello le monate.
Ka laser cutter, menyetla ha e fele.Ha re ikakhele ka setotsoana 'me re bone boselamose bo emetseng boiteko ba hau ba ho qapa!
'Ena ke nako ea likopano tse monate le ho hlahisa boqapi ba hau!Haeba u lehlohonolo ho ba le lisebelisoa tsa mochini tseo u nang le tsona, u se u le mohato o le mong pele ho papali.Amohela moea oa matsatsi a phomolo ka mesebetsi ea matsoho e monate e hapang maikutlo a tebello le monate.Fumana limakatso tsa mpho e bonolo ea Keresemese e sehiloeng ka laser eo ka 'nete e tla tlisetsa motho e mong le e mong pososelo.Ka laser cutter, menyetla ha e fele.Ha re ikakhele ka setotsoana 'me re bone boselamose bo emetseng boiteko ba hau ba ho qapa!
— Lokisetsa
• Wood Board
• Mahlohonolo a u atele
• Laser Cutter
• Faele ea Moralo bakeng sa Mohlala
- Ho etsa mehato (mokhabiso oa Keresemese o sehiloeng ka laser)
Ntlha ea pele,
Khetha boto ea hau ea lehong.Laser e loketse ho rema mefuta e fapaneng ea patsi ho tloha MDF, Plywood ho ea hardwood, Pine.
E 'ngoe,
Fetola faele ea ho itšeha.Ho ea ka lekhalo la ho roka la faele ea rona, e loketse lehong le teteaneng la 3mm.U ka fumana habonolo ho tsoa videong hore mekhabiso ea Keresemese e hlile e hokahane ka li-slots.'me bophara ba sekotjana ke botenya ba thepa ea hau.Kahoo haeba thepa ea hau e le ea botenya bo fapaneng, u lokela ho fetola faele.
Joale,
Qala ho itšeha ka laser
U ka khetha eaflatbed laser seha 130ho tsoa ho MimoWork Laser.Mochine oa laser o etselitsoe ho itšeha le ho betla ka lehong le acrylic.
Qetellong,
Qetella ho itšeha, fumana sehlahisoa se felileng
Laser seha lehong mekhabiso ea Keresemese
Pherekano efe kapa efe le lipotso mabapi le mekhabiso ea motho ea sehiloeng ka laser
Melemo ea ho itšeha ka laser ea lehong
✔ Ha ho na chipping - ka hona, ha ho hlokahale ho hloekisa sebaka sa ho sebetsa
✔ Ho nepahala ho phahameng le ho pheta-pheta
✔ Ho itšeha ka laser ho fokotsa ho robeha le litšila
✔ Ha ho na lisebelisoa
Joang-Ho: Laser Engraving Photos ka Wood
Lehong le betliloeng la Laser ke tsela e MOLEMO le e BONOLO KA HO FETISISA eo ke e boneng bakeng sa ho etsa lifoto.'Me phello ea ho betla foto ea lehong e makatsa ho fihlella lebelo le potlakileng, ts'ebetso e bonolo, le lintlha tse hlakileng.E nepahetse bakeng sa limpho tsa motho ka mong kapa mekhabiso ea lapeng, mongolo oa laser ke tharollo ea mantlha bakeng sa bonono ba lifoto tsa lehong, ho betla setšoantšo sa lehong, le ho betla litšoantšo tsa laser.
Ha ho tluoa mecheng ea ho betla lehong bakeng sa ba qalang le ba qalang, ha ho pelaelo hore laser e bonolo ebile e bonolo.E loketse ho itloaetsa le tlhahiso ea bongata.
Wood Laser Cutter E khothaletsoa
• Matla a Laser: 150W/300W/500W
• Sebaka sa Mosebetsi: 1300mm * 2500mm (51” * 98.4”)
• Matla a Laser: 100W/150W/300W
• Sebaka sa Mosebetsi: 1300mm * 900mm (51.2” * 35.4 ”)
• Matla a Laser: 180W/250W/500W
• Sebaka sa Mosebetsi: 400mm * 400mm (15.7” * 15.7”)
Mekhabiso e meng ea Keresemese ea Laser
• Acrylic snowflake