Mai Yanke Laser 600W (Babban Tsarin)
▶ Injin Yanke Laser Mai 600W (Babban Tsarin)
Bayanan Fasaha
| Wurin Aiki (W * L) | 1300mm * 2500mm (51” * 98.4”) |
| Software | Manhajar Ba ta Intanet ba |
| Ƙarfin Laser | 600W |
| Tushen Laser | CO2 Gilashin Laser Tube |
| Tsarin Kula da Inji | Kulle Ball & Servo Motor Drive |
| Teburin Aiki | Teburin Aiki na Wuka ko na zuma |
| Mafi girman gudu | 1~600mm/s |
| Saurin Hanzari | 1000~3000mm/s2 |
| Daidaiton Matsayi | ≤±0.05mm |
| Girman Inji | 3800 * 1960 * 1210mm |
| Wutar Lantarki Mai Aiki | AC110-220V±10%，50-60HZ |
| Yanayin Sanyaya | Tsarin Sanyaya da Kariya na Ruwa |
| Yanayin Aiki | Zafin jiki:0—45℃ Danshi:5%—95% |
| Girman Kunshin | 3850 * 2050 * 1270mm |
| Nauyi | 1000kg |
Abubuwan da Zane na Babban Yanke Laser na 600W
Babban Tsallake a Yawan Aiki
◾ Ingancin Yanka Mai Kyau Kuma Mai Kyau
Tsarin Hanya Mai Dorewa
Tare da tsawon hanyar gani mafi kyau, madaidaicin hasken laser a kowane wuri a cikin kewayon teburin yankewa na iya haifar da yankewa daidai gwargwado ta cikin dukkan kayan, ba tare da la'akari da kauri ba. Godiya ga hakan, zaku iya samun ingantaccen tasirin yankewa don acrylic ko itace fiye da hanyar laser mai tashi sama.
◾ Ingantaccen Inganci da Daidaito
Tsarin Watsawa Mai Inganci
Tsarin sukurori na X-axis daidai, da kuma sukurori na ball na Y-axis suna ba da kyakkyawan kwanciyar hankali da daidaito don motsi mai sauri na gantry. Idan aka haɗa shi da injin servo, tsarin watsawa yana haifar da ingantaccen aiki mai kyau.
◾ Dorewa da Tsawon Rayuwar Sabis
Tsarin Inji Mai Tsayi
An naɗa jikin injin ɗin da bututu mai murabba'in mm 100 kuma yana yin tsufa da girgiza da kuma maganin tsufa na halitta. Gantry da kan yanke suna amfani da aluminum mai haɗawa. Tsarin gabaɗaya yana tabbatar da yanayin aiki mai kyau.
◾ Sarrafa Sauri Mai Sauri
Babban Saurin Yankan & Sassaka
Injin yanke laser ɗinmu mai girman 1300*2500mm zai iya cimma saurin sassaka 1-60,000mm/min da kuma saurin yanke 1-36,000mm/min.
A lokaci guda, daidaiton matsayi kuma ana tabbatar da shi a cikin 0.05mm, don haka zai iya yanke da sassaka lambobi ko haruffa 1x1mm, babu matsala kwata-kwata.
Kawo Tsarinka Tare da Ingancin da Ya Dace
Acrylic Mai Kauri | Takardar Acrylic da aka Yanke ta Laser
Nemo ƙarin bidiyo game da na'urorin yanke laser ɗinmu a shafinmu na yanar gizoHotunan Bidiyo
Zane-zanen acrylic masu kauri da yawa daga 10mm zuwa 30mmAna iya yanke laser ta hanyar Injin Yanke Laser na Large Format 600W.
Wasu Abubuwan Da Za A Yi La'akari da Su A Lokacin Yankewa:
1. daidaita taimakon iska don rage bugun iska da matsin lamba don tabbatar da cewa acrylic ɗin zai iya yin sanyi a hankali
2. zaɓi ruwan tabarau mai dacewa: kauri kayan, tsawon tsayin daka na ruwan tabarau
3. Ana ba da shawarar ƙarin ƙarfin laser don acrylic mai kauri (idan akwai buƙata daban-daban)
Laser Yanke Acrylic - Aikace-aikace
• Nunin Talla
• Tsarin Gine-gine
• Maƙallin
• Tambarin Kamfani
• Kayan Daki na Zamani
• Wasiku
• Allon talla na waje
• Tashar Samfura
• Kayan Sayayya
• Alamomin Dillali
• Kofin Zakara
('Yan kunnen yanke laser acrylic, alamun yanke laser acrylic, kayan adon yanke laser acrylic, haruffan yanke laser acrylic…)
Zaɓuɓɓukan Ingantawa - Buɗe Cikakken Ikon
Shugaban Laser iri-iri
Mayar da Hankali ta atomatik
TheKyamarar CCDzai iya gane da kuma sanya tsarin a kan acrylic da aka buga, yana taimaka wa mai yanke laser don cimma ingantaccen yankewa tare da inganci mai kyau. Duk wani ƙirar zane da aka keɓance da aka buga za a iya sarrafa shi cikin sassauƙa tare da tsarin gani, yana taka muhimmiyar rawa a talla da sauran masana'antu.
