Selelekela
Ho Seha ka Laser ea CO2 ke eng?
Lisehi tsa laser tsa CO2 li sebelisakhatello e phahameng e tletseng khasetube e nang le liipone pheletsong ka 'ngoe. Liipone li bonahatsa leseli le hlahisoang ke ba nang le matlaCO2pele le morao, ho eketsa khanya.
Hang ha leseli le fihla homatla a lakatsehang, e lebisitsoe hodima thepa e kgethilweng bakeng sa ho seha kapa ho betla.
Bolelele ba maqhubu a laser ea CO2 hangata bo10.6μm, e loketseng bakeng sathepa e seng ea tšepejoalo kaLehong, AcrylicleKhalase.
Ho Seha Diode Laser ke Eng?
Lesetara ea diodetšebeliso ea lisehidiode tsa semiconductorho hlahisalehlaseli la laser le tsepamisitsoeng.
Leseli le hlahisoang ke diode le shebane lesistimi ea lense, ho lebisa lehlasedi hodima thepa bakeng sa ho seha kapa ho betla.
Bolelele ba maqhubu a diode lasers hangata bo potoloha450nm.
CO₂ Laser khahlanong le Diode Laser: Papiso ea ho Seha Acrylic
| Sehlopha | Laser ea Diode | CO₂Lesetara |
| Bolelele ba maqhubu | 450nm (Leseli le Putsoa) | 10.6μm (Infrared) |
| Sebaka sa Matla | 10W–40W (Mehlala e Tloaelehileng) | 40W–150W+ (Mehlala ea Indasteri) |
| Botenya bo boholo | 3–6mm | 8–25mm |
| Lebelo la ho Seha | Butle (E Hloka ho Feta Hangata) | Ka Potlako (Ho Seha ka ho Feta Hanngoe) |
| Ho Lokela ha Lintho Tse Bolehang | E lekanyelitsoe ho Lefifi/Acrylic e sa Tšoaneng (E Ntšo e Sebetsa Hantle) | Mebala Yohle (E Bonaletsang, E Mebala, E Hlahisitsoeng/E Atolositsoeng) |
| Boleng ba Moeli | E ka 'na ea Hloka ho Hlahisoa ka Mor'a ho Hlahisoa (Kotsi ea ho Chesa/Ho Qhibiliha) | Meeli e Boreleli, e Hloekileng (Ha ho Hlokahale ho Etsoa Kamora ho E Sebelisa) |
| Litšenyehelo tsa Lisebelisoa | Tlase | Holimo |
| Tlhokomelo | Tlase (Ha ho na Khase/Mabone a Rarahaneng) | Holimo (Ho Lokisa Seipone, ho Tlatsa Khase, ho Hloekisa Kamehla) |
| Tšebeliso ea Matla | 50–100W | 500–2,000W |
| Ho khona ho nkeha habonolo | E nyane, e bobebe (E loketse Li-workshop tse Nyenyane) | E kholo, e sa sisinyeheng (E hloka sebaka se inehetseng) |
| Litlhoko tsa Polokeho | Ho hlokahala hore ho kenngoe sekoaelo se seng sa ho tsuba | Ho itšeha ho koetsoeng ho ikhethela hoa fumaneha ho thibela ho dutla ha khase |
| Molemo ka ho Fetisisa Bakeng sa | Batho ba ratang lintho tsa boithabiso, Acrylic e Nyenyane e Lefifi, Merero ea DIY | Tlhahiso ea Litsebi, Acrylic e Teteaneng/e Bonaletsang, Mesebetsi e Meholo |
Livideo tse Amanang
Ho itšeha ha Laser e teteaneng ea Acrylic
Na u batla ho seha acrylic ka laser cutter? Video ena e bontša mokhoa oa ho sebelisamatla a phahamengseha ka laser.
Bakeng sa acrylic e teteaneng, mekhoa e tloaelehileng ea ho seha e ka 'na ea se ke ea atleha, empaHo itšeha ka laser ea CO₂mochini o loketse mosebetsi.
E fana kaho seha ho hloekilengntle le ho hloka ho penta ka mor'a ho penta, ho khaoladibopeho tse tenyetsehangntle le hlobo, lee eketsa katleho ea tlhahiso ea acrylic.
Khothaletsa Mechini
Sebaka sa Mosebetsi (W *L): 1300mm * 900mm (51.2” * 35.4”)
Matla a Laser: 100W/150W/300W
Sebaka sa Mosebetsi (W *L): 1300mm * 2500mm (51” * 98.4”)
Matla a Laser: 150W/300W/450W
Lipotso Tse Botsoang Khafetsa
Ha li bapisoa le li-laser tsa diode, li-laser tsa CO2 lia fanamelemo e ikhethang.
Ba na lekapelelebelo la ho fokotsa, e ka sebetsana lethepa e teteaneng, 'me liea nang le bokhoniea ho seha acrylic e hlakileng le khalase, ka honaho atolosa menyetla ea boqapi.
Li-laser tsa CO₂ li fana katekano e ntlebakeng sa ho seha le ho betlathepa e fapaneng.
Li-laser tsa diode lia sebetsabeterelethepa e tšesaanele holebelo le tlase.
Nako ea poso: Mmesa-30-2025