CO2 vs Diode Laser don Acrylic: Shin Diode Laser Zai Iya Yanke Acrylic?
Yadda Lasers Diode da CO2 ke Aiki Don Yanke Acrylic
Laser mai diode:Hasken shuɗi mai girman 445nm. Yana ratsa kai tsaye ta cikin kayan da ba su da haske. Launuka masu duhu ne kawai ke sha, wanda ke haifar da zafi don yankewa ko sassaka.
Laser CO2:Hasken infrared mai nisa 10.6μm. Kusan dukkan nau'ikan acrylic - bayyanannu, masu launi, fari - suna shan sa. Wannan yana ba ku damar yankewa da tsaftace gefuna.
Layin ƙasa:Ko acrylic yana "sha" laser ɗin, ana yanke shi ne ta hanyar tsawon rai, ba kawai ta hanyar ƙarfi ba.
Shin Laser Diode Zai Iya Yanke Acrylic?
Eh, amma dole ne a cika dukkan sharuɗɗa uku da ke ƙasa. Ku rasa ɗaya — kuma ba zai yi aiki ba.
| Aiki ✅ | BA YA AIKI❌ |
|---|---|
| Baƙi | Mai gaskiya |
| Shuɗi mai duhu | Fari |
| Ja mai duhu | Launuka masu haske / Ruwan hoda |
| Kore mai duhu | Mai haske mai sanyi |
| Fari mai haske (da kyar) | Mai haske |
| Ƙarfin Diode | Max Abin dogaro Yanke Kauri |
|---|---|
| 5W | 2–3mm |
| 10W | 3–4mm |
| 20W | 4–5mm |
| 40W | 5–6mm |
| Kwatanta | Laser ɗin Diode | Laser CO2 |
|---|---|---|
| Gudun Yankewa | A hankali (100–150 mm/min) | Sauri (500–2000 mm/min) |
| Ƙarshen gefen | Matte / mai sanyi | Ana iya goge harshen wuta (bayyananne) |
| Samar da rukuni | Ba a yi amfani da shi ba | Inganci sosai |
Su waye Yanke Laser Diode da Yanke Laser CO2 suka dace da su?
Wanene Laser Diode Ya Dace Da Shi?
Jumla ɗaya:Laser ɗin diode ya dace da masu sha'awar sha'awa, masu yin DIY, da ƙananan bita waɗanda ke da ƙarancin kuɗi waɗanda ke yanke acrylic mai duhu/baƙi har zuwa 5mm kauri kawai kuma ba sa buƙatar acrylic mai haske, samarwa da sauri, ko gefuna masu gogewa.
Yanayin da Can Diode Laser ke iya sarrafawa
- Maɓallan acrylic baƙi, tambari, da faranti masu suna
- Tashoshin waya, wasanin gwada ilimi, ƙananan kayan ado na tebur
- Tushen samfuri, bangarorin katangar lantarki
- Zane mai inganci (diode a zahiri yana da ƙaramin girman tabo fiye da CO2)
Wanene Laser na CO2 Ya Dace Da Shi?
Jumla ɗaya:Laser ɗin CO2 ya dace da kasuwanci, masu samar da rukuni, da duk wanda ke buƙatar yanke kowane nau'in acrylic - mai haske, duhu, fari, ko launi - a cikin zanen gado mai kauri (har zuwa 20mm+), a babban gudu, tare da gefuna masu tsabta da aka goge.
Yanayi na Kwantenar Laser ta CO2
- Alamun LED na acrylic masu haske, bangarorin jagora masu haske, haruffan lu'ulu'u
- Alamar haske, wuraren nuni
- Acrylic mai kauri (> 6mm)
- Duk launukan acrylic (baƙi, fari, haske, launuka masu haske)
Laser CO2 vs Diode Laser don Acrylic
| Kwatanta | Laser ɗin Diode | Laser CO2 |
|---|---|---|
| acrylic mai haske | ❌ A'a | ✅ Haka ne |
| Acrylic mai duhu | ✅ Haka ne (a hankali) | ✅ Haka ne (da sauri) |
| Mafi girman kauri na yankan | ≤6–8mm | ≤20mm+ |
| Gudun Yankewa | A hankali | Sau 5–10 cikin sauri |
| Ingancin gefen | Abin karɓa ne, ba a goge shi ba | Za a iya goge harshen wuta |
| Cikakkun bayanai game da sassaka | Mafi girma (ƙaramin girman tabo) | Mai kyau |
| Farashin kayan aiki | Ƙasa | Babban |
| Kudin gyara | Ƙasa | Matsakaici (madubai, tsawon bututu) |
Layin ƙasa:Laser mai diode zai iya yanke acrylic mai duhu ne kawai — yana gazawa a launuka masu haske, fari, ko masu haske. Yana da jinkiri, yana iyakance zuwa kauri ≤6–8mm, kuma yana barin gefuna masu laushi kawai. Laser ɗin CO2 yana yanke kowace nau'in acrylic (mai haske, duhu, fari, mai launi) a saurin sau 5-10, yana iya sarrafa kauri 20mm+, kuma yana ba da gefuna masu tsabta waɗanda aka goge da harshen wuta.
Yadda ake Saita Wutar Lantarki ta CO2 bisa kauri na Acrylic
| Kauri na Acrylic | Ƙarfin da aka Ba da Shawara | Gudun da Aka Ba da Shawara (mm/s) | Wucewa | Bayanan kula |
|---|---|---|---|---|
| 5–8mm | 100W | 20–35 | 1 | Gefuna masu tsabta, na iya zama masu haske |
| 10mm | 100–120W | 12–20 | 1 | Ana buƙatar taimakon iska |
| 15mm | 120–150W | 8–15 | 1–2 | Yi amfani da ruwan tabarau mai mayar da hankali |
| 20mm | 150–200W | 5–10 | 1–2 | Ana buƙatar shaye-shaye mai ƙarfi + sanyaya ruwa |
| 25mm | 200–300W | 3–6 | 2–3 | Babban fa'idar bututun wutar lantarki |
| 30mm+ | 300–500W | 2–4 | 2–4 | Yanke kauri mai tsanani |
Injin yanke Acrylic 130 ɗinmu zai iya yanke zanen acrylic na 21mm. Danna don ganin gwajin kayanmu.
Idan dole ne ku yi amfani da Laser Diode don yanke Acrylic, yi amfani da waɗannan sigogi.
| Ƙarfin Diode | Mafi girman kauri | Gudun da Aka Ba da Shawara (mm/min) | Wucewa |
|---|---|---|---|
| 5W | 2–3mm | 80–120 | 2–3 |
| 10W | 3–5mm | 100–150 | 1–2 |
| 20W | 4–6mm | 150–250 | 1 |
| 40W | 6–8mm | 200–300 | 1 |
Mafi kyawun Masu Yanke Laser don Acrylic
| Riba | Bayani |
|---|---|
| Babban ƙarfi (har zuwa 300W) | Za a iya yanke acrylic mai kauri sosai, yana faɗaɗa bambancin samarwa |
| Tsarin wucewa ta hanyoyi biyu | Yana ba da damar kayan ya fi faɗi fiye da gadon yankewa - ya dace da dogayen zanen acrylic |
| Zaɓuɓɓukan tushen laser da yawa | Bututun gilashin CO2 (mai rahusa) ko bututun ƙarfe na RF (tsawon rai, ingantaccen ingancin katako) |
| Masana'antu masu dacewa | Alamar shagon sayar da kaya, maƙallan gasa, nunin tallan ƙanana zuwa matsakaici |
| Riba | Bayani |
|---|---|
| An ƙera shi don manyan allunan tallan acrylic da manyan sana'o'in katako | Wuce ɗaya, babban takarda |
| Hanyar shiga ta hanyoyi huɗu | Yana ɗaukar zanen gado masu tsayi da sassauci sosai |
| Yankan sauri mai yawa (36,000 mm/min) | Babban riba mai inganci |
| Masana'antu masu dacewa | Manyan nunin tallan samarwa, alamun kamfani, kayan daki na zamani |
Ga bidiyon aiki game da yanke acrylic mai tsabta da laser CO₂. Ku biyo mu don ƙarin koyo game da wannan tsari.
Wanne daga cikin waɗannan injunan guda biyu ne ya fi dacewa da ku? Tuntuɓe mu don ƙarin bayani, kuma za mu ba ku mafi kyawun shawara.
Tambayoyin da ake yawan yi akai-akai
A: Yawanci a'a, ko kuma ba shi da kyau sosai.Farin acrylic yana nuna kuma yana warwatsa tsawon shuɗi (~445nm) na laser diode, don haka ba a sha da yawa ba. Laser diode mai ƙarfin 20W zai iya ɗan yi alama ko narke saman, amma ba zai ratsa ba. Idan dole ne ku yi amfani da laser diode don acrylic, ku manne da shilaunuka masu duhu (baƙi, shuɗi mai duhu, ja), yi amfani da saurin gudu mai jinkiri, da kuma wucewa da yawa - amma ingancin gefen zai kasance ƙasa da sakamakon CO2.
A:Ee.don fenti mai duhu na acrylic 3-5mm.
A:Diode (ƙaramin girman tabo).
A: Haka ne, kuma yana da kyau a gare shi.Laser na CO2 su ne zaɓin da aka saba amfani da shi don yanke acrylic - duka masu haske da launi, ko waɗanda aka yi da siminti ko waɗanda aka fitar. Dangane da ƙarfin laser, za ku iya yanke kauri har zuwa 10-20mm. Gefen da aka yanke sau da yawa yana da kyakkyawan gogewa da santsi. Kawai tabbatar da samun iska mai kyau, kamar yadda acrylic mai narkewa ke fitar da ɗan ƙaramin tururi mai ban haushi.
Idan kuna da wasu tambayoyi game da yanke zanen acrylic da laser CO₂, tuntuɓe mu.
Lokacin Saƙo: Yuni-01-2026