I-Laser Engraving Copper (ecocekileyo): Iindlela zokusebenzisa i-Fiber Laser kunye ne-UV Laser
Iimpawu zeCopper (Pure) Material
Ubhedu olucocekileyo lubhekisa kwisixhobo sesinyithi esinomxholo wobhedu oqhele ukuba ngaphezulu kwe-99%, okwaziwa ngokuba yi-purple copper okanye i-red copper. Iimpawu zaso eziphawulekayo kukuqhuba kakuhle kombane kunye nobushushu, okwesibini emva kwesilivere phakathi kwazo zonke iintsimbi zoshishino. Ke ngoko, isetyenziswa kakhulu kwiimveliso ezifana neebhasi zekopolo, iiterminal zekopolo, iintambo, izihlanganisi zebhetri, kunye nezinto ze-elektroniki.
Imingeni yokuGqoba ngeLaser Copper（ Pure）
Ubhedu olucocekileyo kunzima ukulukrola nge-laser kunethusi okanye ubhedu ngenxa yokukhanya okuphezulu kunye nokuqhuba kobushushu, okunciphisa ukusebenza kakuhle komatshini we-fiber laser. Kwiindawo zoshishino ezifana neebhasi, umatshini we-fiber laser we-50W onemilinganiselo ephuculiweyo ubalulekile. Ukuze ufumane iinkcukacha ezincinci, umkroli we-UV laser unikezela ngokuchanekileyo okuphezulu.
Ukukrola ngeLaser uCopper (ecocekileyo) xa kuthelekiswa nezinye iinkqubo
| Inkqubo | Uchaneko | Ubunzulu bokukwazi | Isantya | Ixabiso | Ukuguquguquka |
|---|---|---|---|---|---|
| Ukukrola ngeLaser | Phezulu | Phakathi | Phezulu | Phakathi | Phezulu kakhulu |
| Umatshini we-CNC | Phakathi-Phezulu | Phezulu | Phakathi-Phantsi | Phakathi-Phezulu | Phakathi |
| Ukukrola iikhemikhali | Phakathi | Iphantsi | Phezulu (iqela) | Iphantsi | Phakathi |
| Ukunyathela | Phakathi | Iphantsi | Phezulu kakhulu | Iphezulu (ixabiso lokubumba) | Iphantsi |
| Ukukrola Ngesandla | Phezulu | Phezulu | Isezantsi kakhulu | Phezulu | Phezulu |
Kucetyiswa ukuba kugxilwe kakhulu ekukroleni nge-laser. Xa kuthelekiswa nezinye iinkqubo, ubhedu olukrola nge-laser luguquguquka ngakumbi, lubonelela ngocoselelo oluphezulu, alufuni zimo, kwaye lunexabiso eliphakathi. Lufanelekile ngokukodwa kwizicelo zokumakisha ezincinci kunye nokulandeleka okufana neekhowudi ze-QR kunye neenombolo ze-serial.
Ukongeza ekukroleni ubhedu, ii-laser zefayibha zezinye izinto ezininzi zesinyithi. Cofa ukuze ufunde okungakumbi.
Ukufaneleka kweFiber kunye ne-UV Lasers kwiCopper （Pure） Engraving
I-laser yefayibha (amandla aphezulu kakhulu + ukuqokelelwa kobushushu)
- Uxinano lwamandla aphezulu (≥50W) lunika amandla aqinileyo akhawulezileyo
- Amandla okuqokelela iipulses eziphindaphindwayo eziphezulu
- Yenza umaleko we-micro-oxide ukuze inyuse ukufunxwa
- Ukudlula okuninzi kudala uphawu ngokuqokelelwa kobushushu
Ileyiza ye-UV (ububanzi obufutshane kunye nesenzo se-photochemical)
- Ubude obufutshane be-wavelength → ukufunxwa ngcono yi-copper
- Amandla aphezulu e-photon
- Ukususwa kobushushu obubandayo
- Akukho phantse ukusasazeka kobushushu
Ubunzima kunye nezisombululo zoMatshini weFiber Laser kunye ne-UV Laser Engraver kwiCopper （Pure）
| Umngeni | Isisombululo |
|---|---|
| Ukukhanya okuphezulu kobhedu (>90% kwi-1064 nm) kubonisa uninzi lwamandla elaser. | Sebenzisa imo ye-pulsed engaphezulu kwe-50W, ulungise umphezulu ngaphambi kokulungisa ukuze wenze umaleko we-oxide, kwaye usebenzise iipaseji ezininzi. |
| Umngeni | Isisombululo |
|---|---|
| Iilaser ze-UV zifunxa kakuhle kodwa amandla aphantsi athintela ubunzulu/isantya. | Sebenzisa i-ablation ebandayo (isiphumo se-photochemical) kunye ne-multi-pulse overlapping ukuze ufumane ukuchaneka kwe-micron; phucula ukubumba kwe-beam. |
Amatyala okusetyenziswa komatshini wokukrola i-UV Laser kunye ne-Fiber Laser yeCopper （Pure）
Ukukrolwa kweCopper ngeFiber Laser - Amatyala okusetyenziswa
1. I-Power Battery Busbar, iTab, kunye noGcino lwaMandla Umzobo weCopper Connector
Iimveliso zesicelo:
- Ibha yebhasi yobhedu yebhetri yamandla
- Ithebhu yobhedu yebhetri
- Inkqubo yokugcina amandla yobhedu edibanisayo
Ukucubungula umxholo:
- Ikhowudi yeQR
- Inombolo yesiriyeli
- ILOGO / Uphawu lwebhrendi
- Ikhowudi yokulandelela imveliso
2. Umzobo weBhasi yoMbane kunye neCandelo loSasazo loMbane
Iimveliso zesicelo:
- Ibhasi yekopolo kwiikhabhathi zokusasaza umbane
- Iindawo zokunxibelelana zekopolo zee-circuit breakers
- Abaqhubi beCopper kwi-switches
Ukucubungula umxholo:
- Inkcazo / inombolo yomzekelo
- Inombolo yokuchonga ukufakwa
- I-LOGO yeNkampani
3. Ubugcisa beCopper kunye nokukrola izinto zesikhumbuzo
Iimveliso zesicelo:
- Iiplaki zekopolo
- Iimbasa zeCopper
- Iimpawu zesikhumbuzo zekopolo
- Iziqwenga zokuhombisa zekopolo
Ukucubungula umxholo:
- Iipateni zemifanekiso
- Umbhalo obhaliweyo
- I-LOGO yeNkampani
Ukukrolwa kweCopper ngeLaser ye-UV – Amatyala okusetyenziswa
1. Ukucwangciswa ngokuchanekileyo kwe-PCB Copper Foil
Iimveliso zesicelo:
- Iibhodi zesekethe zePCB
- Iisekethe eziprintiweyo eziguquguqukayo ze-FPC
- Iibhodi zesekethe ezikhawulezayo / ezinesantya esiphezulu
Ukucubungula umxholo:
- Iipateni zesekethe encinci
- Ukususwa kwefoyile yekopolo
- Ukumakishwa kwekhowudi
2. Ukumakisha kwiinxalenye zeCopper kwiiSemiconductors kunye neenxalenye ze-elektroniki
Iimveliso zesicelo:
- Izinki zobushushu zekopolo
- Izakhelo zentsimbi yobhedu
- Iitships zokupakisha ii-substrates zethusi
Ukucubungula umxholo:
- Ikhowudi ye-Data Matrix 2D
- Ibhetshi yemveliso/inombolo yelothi
- Umbhalo omncinci / oonobumba abancinci
3. Ukucutshungulwa kweCopper Component kwiifowuni eziphathwayo kunye nee-elektroniki zabathengi
Iimveliso zesicelo:
- Igumbi le-VC elinomphunga
- Imodyuli yoKusasaza uBushushu beCopper
- Izixhobo zoLwakhiwo lweCopper zoNxibelelwano lwe-5G
Iimpawu zokucubungula:
- Ukucubungula ipateni ecolekileyo kakhulu
- Akukho tyheli okanye mnyama ocacileyo
- Ifanelekile kwimveliso ye-elektroniki ekumgangatho ophezulu
Ukusebenza Ngobuchule kweFiber Laser kunye ne-UV Laser Engraver kwiCopper （Pure）
1. Amanqaku Okusebenza Okudweba Ubhedu Nge-Fiber Laser
Ukulungiswa komphezulu wekopolo:
Ubhedu olukhanyayo/olukhanyayo lubonakalisa ukukhanya kwelaser ngokulula; unyango lwesanti olukhanyayo okanye unyango lwe-oxidation lunokusetyenziswa kuqala ukwandisa ukufunxwa. Kwiipleyiti zobhedu ezicocekileyo ezikhanyayo kakhulu, imo ye-short pulse enamandla aphezulu ingasetyenziswa.
Useto lomatshini:
Sebenzisa ilensi yokugxila enobukhulu obuncinci bebala (ubude be-focal obuyi-100–160 mm) ukuze wonyuse uxinano lwamandla. Kucetyiswa ukuba ukrole ngegesi yokuncedisa (i-nitrogen / umoya) ukuze uphephe i-oxidation kunye nokuchitheka.
Iindlela zokuzoba:
Imo yokumakisha ngesantya esiphezulu ifanelekile kwiikhowudi ze-QR kunye neenombolo ze-serial. Imo yokuskena iipasi ezininzi okanye imo yokukrola ngokunzulu ifanelekile kwimisebenzi yobugcisa kunye nokukrola imbasa yesikhumbuzo.
Ukhuseleko kunye nokutshatyalaliswa kobushushu:
I-Copper ine-thermal conductivity ephezulu; ukucutshungulwa okwenziwa rhoqo kuyacetyiswa ukuze kuthintelwe ubushushu obuphezulu kunye nokugoba kwendawo. Kwiindawo ezinkulu zobhedu okanye ukucutshungulwa okuqhubekayo kwendawo enkulu, kufuneka ukuphola komoya/ukupholisa amanzi okuncedisayo.
2. Iindawo Zokusebenza Zokukrola Ubhedu Nge-UV Laser
Akukho mfuneko yonyango lwangaphambi kokuba luqale:
Ubude obufutshane be-ultraviolet (355 nm) bufunxwa kakuhle yi-copper, ngoko ke ubhedu olukhazimlayo/olucoliweyo lunokucutshungulwa ngokuthe ngqo. Lufanelekile ngokukodwa kwii-micro-circuits, ukumakishwa kwe-PCB, kunye neekhowudi ze-micro QR.
Iindlela zokuzoba:
Ububanzi obuqhelekileyo bepulse buyi-10–20 ns okanye bufutshane, kunye namazinga aphezulu okuphindaphinda (50–200 kHz). Isetyenziswa kakhulu ekukroleni okunganzulu, ekuphawuleni umphezulu, okanye kwiinkqubo zokususa ubhedu.
Isiphumo esincinci sobushushu:
I-laser ye-UV yindlela yokucubungula ebandayo; umphezulu awubi mnyama kangako kwaye umbane awonakalanga.
Indlela yokwenza uphawu lwe-fiber laser kwisinyithi okanye kwezinye iimveliso? Le vidiyo ibonisa isifundo sesoftware ye-EZCAD ukusuka kwisetingi ye-Ezcad laser ukuya kwi-Ezcad laser marking. Umatshini wokumakisha i-fiber laser we-MimoWork ubonelela ngendlela echanekileyo yokumakisha i-laser kwi-Stainless Steel, Carbon Steel, Metal, Alloy Metal, PVC, kunye nezinye izinto ezingezizo zesinyithi. Ngesikhokelo sokusebenza kwe-EZCAD, ungafikelela kwisantya esiphezulu esiqhubekayo kunye nokuchaneka okuphezulu, kunye nokuphindaphindwa okuphezulu kokumakisha i-fiber laser.
Iiparameter ezicetyiswayo zeFiber kunye ne-UV Laser Engraving Copper (ecocekileyo)
| Ipharamitha | Ixabiso leReferensi |
|---|---|
| Amandla elaser | 20–100 W (eqhelekileyo kwiinkqubo zemizi-mveliso/zedesktop) |
| Isantya sokuphefumla | 20–80 kHz (kucetyiswa i-35–40 kHz) |
| Isantya sokuskena | 100–2000 mm/s (kucetyiswa ukuba ibe yi-300–1000 mm/s) |
| Ububanzi bepulse | 100–200 ns (ilungisiwe okanye ilungiseka; i-MOPA ivumela ukuba ibanzi) |
| Ubude befokhalthi | 100–200 mm (eqhelekileyo yi-160 mm) |
| Ubunzulu bokukrola | 10–200 µm (umzobo onzulu) / 1–10 µm (uphawu olucolekileyo) |
| Ipharamitha | Ixabiso leReferensi |
|---|---|
| Amandla elaser | 3–20 W (ixhaphakile kwiinkqubo zedesktop/elebhu) |
| Isantya sokuphefumla | 50–200 kHz |
| Isantya sokuskena | 50–500 mm/s |
| Ububanzi bepulse | 10–20 ns |
| Ubude befokhalthi | 50–100 mm |
| Ubunzulu bokukrola | 1–10 µm (inqanaba le-micron, uphawu olucolekileyo) |
| Uncedo ngegesi | Ukhetho: umoya okanye i-nitrogen, ukuze kuthintelwe i-oxidation |
Ukuba awuqinisekanga ukuba zeziphi iiparameter ezifanelekileyo kwizinto zakho zobhedu, nceda unxibelelane nathi.
Iingcebiso zoThengo loMshini wokuGqiba ngeLaser weCopper (ococekileyo)
I-Fiber Laser
Iingenelo:Amandla aphezulu, afanelekileyo ekukroleni nzulu nasekuphawuleni indawo enkulu. Inezibonelelo ekucubunguleni iindawo zobhedu ezingqindilili kunye nezinto zobugcisa.
Phawula:I-Copper inomoya okhawulezayo kakhulu wokuhambisa ubushushu. Ukucubungula rhoqo kunokukhokelela ekuqokeleleni kobushushu, okubangela ukuguqulwa kwe-workpiece okanye ukungalingani kweempawu. Kucetyiswa ukusebenzisa i-intermittent scanning okanye i-air-assisted cooling ukuze kuphele ubushushu; kwakhona, hlola rhoqo ilensi yokukhusela ukuthintela ukukhanya okubonakalayo ukuba kungonakalisi intloko ye-laser.
Ixabiso:Ubhedu lukhanya kakhulu, ngoko ke kufuneka kukhethwe imodeli exhasa ukucutshungulwa kweentsimbi ezikhanya kakhulu. Amandla aphezulu aza neendleko eziphezulu.
I-UV Laser
Iingenelo:Ifanelekile kwizicelo ezifuna ukuchaneka okuphezulu kakhulu, ukutshintsha umbala/ukutshintsha umbala, kunye nezixhobo ezincinci kakhulu (ezinobuthathaka kutshintsho lobushushu).
Phawula:Amandla aphantsi kakhulu aya kubangela isantya sokucubungula esicothayo. Ubunzulu bokukrola buncinci – abufanelekanga ukukrola nzulu izinto zobugcisa.
Ixabiso:Oomatshini be-laser be-UV babiza kakhulu, kodwa banikezela ngeenzuzo ezikhethekileyo zokuphawula ubhedu oluchanekileyo nolunobuzwe kubushushu.
Iimashini zeLaser ezicetyiswayo zokuGqiba iCopper (ecocekileyo)
| Into | Okulindelekileyo Kwangempela (I-UV Laser kwiCopper) |
|---|---|
| Isantya sokucubungula kwi-copper | Ephantsi ukuya kwephakathi (~500–2,000 mm/s inokufikeleleka, kuxhomekeke kumandla kunye nobunzulu) |
| Iziphumo zokumakisha | Umahluko ophezulu (amanqaku amhlophe, amnyama, okanye agolide), oonobumba abacacileyo kunye neekhowudi ze-QR |
| Ithuba lokukrola nzulu | Ayifanelekanga ukukrola nzulu |
| Isiphumo sobushushu | Iphantsi kakhulu - ukususwa kwesikhunta kubanda, phantse akukho ndawo ichaphazelekileyo bubushushu okanye ukuguquka |
| Into | Okulindelekileyo Okwenene |
|---|---|
| Isantya sokucubungula kwi-copper | Phakathi (~1,000–3,000 mm/s inokufikelelwa) |
| Iziphumo zokumakisha | Oonobumba kunye neekhowudi ze-QR zicacile, umahluko omncinci wombala |
| Ithuba lokukrola nzulu | Ifanelekile ukukrola okunzulu |
| Isiphumo sobushushu | Iyabonakala kakhulu, kodwa ingancitshiswa ngokulungiswa kweparameter |
FAQ
A:Iilaser zefayibha (ingakumbi i-100–200W nangaphezulu) zifanelekile kwiingcibi ezinzulu ukuya kweziphakathi kunye nokumakishwa kwendawo enkulu. Iilaser ze-UV azifanelekanga kwiingcibi ezinzulu (ubunzulu)
A:I-laser ye-UV iyathandwa. Impawu zayo zokucubungula ukubanda azivelisi ndawo ichaphazelekileyo bubushushu, nto leyo ethintela ukuguguleka okanye ukugqobhoka kwefoyile yobhedu ebhityileyo. Nokuba amandla aphantsi, i-laser yefayibha inokubangela ukugqithisela nokuguquka.
A: Isiphumo sokukhupha okubandayo kwe-UV laser sinokuthi, ngokulungelelanisa amandla okubetha, isantya sokuskena, kunye nesantya sokuskena, senze ubukhulu obahlukeneyo be-oxide layer okanye ii-microstructures kumphezulu, ezithi emva koko zibonakalise imibala eyahlukeneyo..inkqubo engenazo iintsholongwane kunye nongcoliseko.
A:Kucetyiswa umatshini we-laser we-10W UV. Awudingi nyango lwangaphambi kokusetyenziswa, unikezela ngokuguquguquka okuphezulu, kwaye ufanelekile kwiindidi ezahlukeneyo zezinto kunye nokumakishwa okucokisekileyo. Ukuba kufuneka ukukrola okunzulu ngamanye amaxesha, umatshini we-laser we-100W fiber unokukhethwa endaweni yoko.
Ukuba unemibuzo malunga nokusebenzisa ii-UV kunye ne-fiber lasers ukukrola ubhedu, nceda unxibelelane nathi ngoko nangoko.
Ixesha lokuthumela: Juni-09-2026