MimoPROTOTYPE - MimoWork
MimoPROTOTYPE

MimoPROTOTYPE

Isoftware yeLaser - MimoPROTOTYPE

Ngokusebenzisa ikhamera yeHD okanye iskena sedijithali, iMimoPROTOTYPE izibona ngokuzenzekelayo izishwankathelo kunye needati zokuthunga zesiqwenga semathiriyeli kwaye ivelise iifayile zoyilo onokuthi uzingenise kwisoftware yakho yeCAD ngokuthe ngqo.Xa kuthelekiswa nenqaku lokulinganisa lemanyuwali ngokwesiko, ukusebenza kakuhle kwesoftware yomfuziselo kuphindwe kaninzi.Kufuneka ubeke kuphela iisampuli zokusika kwitafile yokusebenza.

NgeMimoPROTOTYPE, Unako

laser-software-mimoprototype

• Dlulisela iisampulu zesampulu kwidatha yedijithali enomlinganiselo wobungakanani obufanayo

• Ukulinganisa ubungakanani, imilo, isidanga se-arc, kunye nobude bempahla, iimveliso ezigqityiweyo, kunye nesiqwenga esisikiweyo.

• Lungisa kwaye uyila ngokutsha ipleyiti yesampula

• Funda kwipatheni yoyilo lokusika lwe-3D

• Ukucutha ixesha lophando kwiimveliso ezintsha

Kutheni ukhetha MimoPROTOTYPE

Ukusuka kwi-software ye-software, umntu unokuqinisekisa ukuba iziqwenga zedijithali zihambelana kakuhle kangakanani na iziqwenga zokusika kunye nokuguqula iifayile zedijithali ngokuthe ngqo ngempazamo eqikelelweyo engaphantsi kwe-1 mm.Xa uvelisa iphrofayili yokusika, umntu unokukhetha ukuba enze imigca yokuthunga, kwaye ububanzi bomthungo bunokulungiswa ngokukhululekileyo.Ukuba kukho imithungo yangaphakathi yedart kwiqhekeza elisikiweyo, isoftware iya kuvelisa ngokuzenzekelayo iidati zokuthunga ezihambelanayo kuxwebhu.Ngoko yenza i-scissor seams.

Imisebenzi esebenziseka lula

• Ulawulo lwamaqhekeza

I-MimoPROTOTYPE inokuxhasa ifomathi yefayile yePCD kwaye igcine zonke iifayile zedijithali kunye nemifanekiso kuyilo olufanayo ngolungelelwano, kulula ukuyiphatha, iluncedo ngakumbi xa umntu enesampulu ezininzi zeesampulu.

• Ukuleyibhelishwa koLwazi

Kwiqhekeza ngalinye lokusika, umntu unokulebula ulwazi lwelaphu (umxholo wezinto eziphathekayo, umbala welaphu, ubunzima begram, kunye nabanye abaninzi) ngokukhululekile.Iziqwenga zokusika ezenziwe nge-textile efanayo zinokungeniswa kwifayile efanayo ukulungiselela inkqubo yokuseta ngokuqhubekayo.

• Ifomathi exhasayo

Zonke iifayile zoyilo zinokugcinwa njenge-AAMA - ifomati yeDXF, exhasa uninzi lwesoftware ye-Apparel CAD kunye nesoftware ye-Industrial CAD.Ukongeza, iMimoPROTOTYPE inokufunda iifayile zePLT/HPGL kwaye ziguqulele kwifomathi ye-AAMA-DXF ngokukhululekileyo.

• Thumela ngaphandle

Iziqwenga ezichongiweyo zokusika kunye nezinye iziqulatho zinokungeniswa kumazwe angaphandle kwi-laser cutters okanye iiploti ngokuthe ngqo

Mimo-Umzekelo

Thetha noMcebisi weLaser ngoku!


Thumela umyalezo wakho kuthi:

Bhala umyalezo wakho apha kwaye uwuthumele kuthi