Kiʻiʻoniʻoni ʻoki Laser (Kiʻiʻoniʻoni PET, Kiʻiʻoniʻoni Pale) - MimoWork
Nānā Haʻawina – Film

Nānā Haʻawina – Film

Kiʻiʻoniʻoni ʻoki Laser

ʻO ka hopena maikaʻi o ka ʻoki ʻana i ka kiʻiʻoniʻoni PET

ʻO ke kiʻiʻoniʻoni polyester ʻokiʻoki laser ka mea maʻamau.Ma muli o ka hana polyester koʻikoʻi, ua hoʻohana nui ʻia ma ka pale hōʻike, ka uhi ʻana o ka membrane, touchscreen a me nā mea ʻē aʻe.Kūʻē ka mīkini ʻoki ʻoki laser maikaʻi loa i ka hiki ke hoʻoheheʻe laser ma ke kiʻiʻoniʻoni e hana i ka maikaʻi ʻoki maʻemaʻe & palahalaha ma ka hana kiʻekiʻe.Hiki ke ʻoki ʻia nā ʻano like me ka laser ma hope o ka hoʻouka ʻana i nā faila ʻoki.No ke kiʻiʻoniʻoni i paʻi ʻia, paipai ʻo MimoWork Laser i ka mea ʻoki laser contour i hiki ke hoʻomaopopo i ka ʻoki ʻoki pololei ʻana ma ke kumu me ke kōkua o ka ʻōnaehana ʻike pahupaʻi.

Ma waho aʻe o kēlā, no ka vinyl hoʻoili wela, 3M® kiʻiʻoniʻoni pale, kiʻiʻoniʻoni noʻonoʻo, kiʻiʻoniʻoni acetate, kiʻi Mylar, ʻokiʻoki laser a me ke kahakaha laser ke pāʻani nei i nā kuleana koʻikoʻi i kēia mau noi.

kiʻiʻoniʻoni2

Hōʻike wikiō - Pehea e ʻoki ai i ke kiʻiʻoniʻoni laser

• kiʻiʻoniʻoni ʻokiʻoki laser

• Kiʻiʻoniʻoni paʻi ʻokiʻoki laser

Pono wale e hoʻouka i ka faila ʻokiʻoki a hoʻonohonoho i ka parameter laser, e hoʻomaka ka mīkini laser i ka ʻoki pili ʻole, me ke ala ʻoki pololei a me ka ʻoki pololei.Hāʻawi ka hānai ʻana a me ka lawe ʻana i ka hana paʻa a paʻa no ka ʻoki ʻana i ka laser film.

He nīnau e pili ana i ka ʻokiʻoki ʻana i ke kiʻi holoholona holoholona?

ʻO nā mea maikaʻi o ka ʻoki ʻana i ka PET Laser

Hoʻohālikelike ʻia me nā ʻano mīkini hana maʻamau no ka papa maʻamau i hoʻohana ʻia e like me nā noi hoʻopili, ua hoʻoikaika ʻo MimoWork e hāʻawi i nā hopena ʻoki laser PETG i ke kiʻiʻoniʻoni i hoʻohana ʻia no nā noi optical a no kekahi mau ʻoihana kūikawā a me nā hoʻohana uila.He kūpono loa ka 9.3 a me 10.6 micro wavelengths CO2 laser no ka ʻoki ʻana i ka kiʻi ʻoniʻoni PET a me ka vinyl engraving laser.Me ka mana laser pololei a me ka hoʻonohonoho wikiwiki ʻana, hiki ke hoʻokō ʻia kahi ʻoki ʻoki aniani.

kiʻiʻoniʻoni-ʻoki laser

ʻOki ʻana i nā ʻano maʻalahi

laser-oki-kiʻi-maʻemaʻe

Maʻemaʻe & ʻoki ʻoki ʻoki

kiʻiʻoniʻoni laser-engraving

Kiʻiʻoniʻoni laser engraving

✔ Kiʻekiʻe kiʻekiʻe - 0.3mm ʻokiʻoki hiki ke hiki

✔ ʻAʻohe paʻi i nā poʻo laser me ka mālama ʻana i ka hoʻopili ʻole

✔ ʻO ka ʻoki ʻoki ʻana i ka laser e hana i ka ʻaoʻao maʻemaʻe me ka ʻole o ka hoʻopili ʻana

✔ Kiʻekiʻe kiʻekiʻe no kēlā me kēia ʻano, ka nui o ke kiʻiʻoniʻoni

✔ ʻO ka hilinaʻi kiʻekiʻe kiʻekiʻe e hilinaʻi nei i ka ʻōnaehana conveyor kaʻa

✔ ʻO ka mana laser kūpono e hoʻomalu i ka ʻoki kūpono no ke kiʻiʻoniʻoni multi-layer

Manaʻo ʻia ka mīkini ʻoki kiʻiʻoniʻoni

• Mana Laser: 100W / 150W / 300W

• Wahi Hana: 1300mm * 900mm (51.2" * 35.4 ")

• Mana Laser: 180W / 250W / 500W

• Wahi Hana: 400mm * 400mm (15.7” * 15.7”)

Nā koho hoʻomaikaʻi:

Mea hānai ʻakomi

Hiki i ka auto-feeder ke hānai maʻalahi i ka mea ʻōwili i ka papa hana conveyor.ʻO ia ka mea e hōʻoiaʻiʻo ai i ka mea kiʻiʻoniʻoni palahalaha a maʻalahi, e ʻoi aku ka wikiwiki a me ka maʻalahi o ka ʻoki laser.

Kāmeʻa CCD

No ke kiʻiʻoniʻoni i paʻi ʻia, hiki i ka CCD Camera ke ʻike i ke kumu a aʻo i ke poʻo laser e ʻoki ma ka contour.

E koho i ka mīkini laser a me nā koho laser i kūpono iā ʻoe!

Ke manaʻo nei ʻo MimoWork laser e hoʻoponopono i nā pilikia i ka wā o kāu hana kiʻiʻoniʻoni
a hoʻoikaika i kāu ʻoihana i ka hoʻokō ʻana i kēlā me kēia lā!

Nā noi maʻamau o ke kiʻi ʻokiʻoki laser

• Kiʻiʻoniʻoni Makani

• Papa inoa

• Paʻi Paʻi

• Hoʻomoe uila

• Hoʻokohu Hana Hana

• Nā Hoʻololi Membrane

• Lepili

• Sticker

• Pale Maka

• Hoʻopili maʻalahi

• Stencils Mylar Film

kiʻiʻoniʻoni-01

I kēia mau lā, ʻaʻole hiki ke hoʻohana wale ʻia ke kiʻiʻoniʻoni i nā noi ʻoihana e like me reprographics, hot stamping film, thermal-transfer ribbons, nā kiʻi palekana, hoʻokuʻu i nā kiʻiʻoniʻoni, nā lipine adhesive, a me nā lepili a me nā decals;uila / uila noi e like me photoresists, kaʻa, a me ka generator insulation, uwea a me ka uwea uhi, membrane kuapo, capacitors, a maʻalahi paʻi kaapuni akā, e hoʻohana 'ia i loko o ka 'ano hou noi e like me ka flat panel displays (FPDs) a me solar cell, etc.

Mea waiwai o PET Film:

kiʻiʻoniʻoni ʻokiʻoki laser

ʻO ka kiʻiʻoniʻoni polyester ka mea nui ma waena o nā mea āpau, i kapa pinepine ʻia ʻo PET (Polyethylene Terephthalate), he mau waiwai kino koʻikoʻi no kahi kiʻiʻoniʻoni.ʻO kēia mau mea e pili ana i ka ikaika tensile kiʻekiʻe, ke kūpaʻa kemika, ke kūpaʻa wela, ka palahalaha, ka māmā, ke kūpaʻa wela kiʻekiʻe, ka wela a me nā waiwai insulation uila.

ʻO ka kiʻiʻoniʻoni polyester no ka hoʻopili ʻana e hōʻike ana i ka mākeke hoʻohana hope loa, a ukali ʻia e nā ʻoihana e pili ana i nā hōʻike papa pālahalaha, a me nā uila / uila e like me ke kiʻi ʻoniʻoni, a pēlā aku.

Pehea e koho ai i ka mīkini ʻoki kiʻiʻoniʻoni kūpono?

ʻO ke kiʻi ʻoniʻoni ʻoki laser PET a me ke kiʻi kiʻi kiʻi laser nā mea hoʻohana nui ʻelua o ka mīkini ʻoki laser CO2.No ka mea ʻo ka kiʻiʻoniʻoni polyester he mea i loaʻa ka laulā o nā noi, i mea e hōʻoia ai ua kūpono kāu ʻōnaehana laser no kāu noi, e ʻoluʻolu e kelepona iā MimoWork no ka nīnau hou ʻana a me ka ʻike.Ke manaʻoʻiʻo nei mākou he mea ʻokoʻa ka ʻike loea me nā ʻenehana e hoʻololi wikiwiki nei i ke ala o ka hana ʻana, ka hana hou, ka ʻenehana a me ke kālepa.

Pehea e ʻoki ai i ka kiʻiʻoniʻoni pale laser?
E kelepona mai iā mākou no kekahi nīnau, kūkākūkā a i ʻole kaʻana ʻike


E hoʻouna i kāu leka iā mākou:

E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou