Why Choose Coolmax?
Coolmax Fabric
Tired of sticky, sweat-soaked shirts after workouts? Coolmax fabric is no ordinary material—it acts like a "second skin" with built-in climate control! Scientists have found that athletic wear made with Coolmax fabric reduces surface moisture by up to 50% compared to cotton.
Next time you see marathon runners speeding by in reflective singlets, chances are their "secret weapon" is Coolmax fabric—woven from millions of hollow-core fibers!
Introduction of Coolmax Fabric
Coolmax fabric is an innovative functional textile renowned for its exceptional moisture-wicking properties. Its unique four-channel fiber structure efficiently absorbs sweat and enhances evaporation, ensuring long-lasting dryness. Coolmax fabric is widely used in sportswear, casual apparel, and outdoor gear, offering both breathability and comfort, making it an ideal choice for high-performance wear.
1. Origins & Development
Born in the labs of DuPont in 1986, Coolmax fabric revolutionized activewear by solving a centuries-old problem: sweat management. Originally developed for astronauts' temperature regulation, this smart textile quickly escaped Earth's orbit to transform athletic performance.
2. Why Coolmax?
Coolmax isn’t just fabric—it’s a breakthrough in human engineering! Picture this: Each fiber acts like a microscopic drainpipe, "sucking away" sweat from your skin in 0.01 seconds. Lab tests prove it dries 5x faster than cotton, which is why NBA players rely on it as their secret weapon during overtime.
3. Why It Matters
Sweat is your body's natural coolant, but trapped moisture becomes your worst enemy. This is where Coolmax changes everything. Unlike ordinary fabrics that simply absorb, Coolmax actively transports moisture through its patented 4-channel fibers - a technology so effective it's been adopted by NASA for astronaut undergarments.
Comparison with Other Fibers
| Feature | Coolmax® | Cotton | Wool | Standard Polyester |
|---|---|---|---|---|
| Moisture Absorption | 5x faster than cotton (lab-tested) | Absorbs but dries slow | Moderate absorption | Quick absorption |
| Sweat-Wicking | 4-channel active moisture movement | No wicking capability | Loses insulation when wet | Surface evaporation only |
| Antibacterial Properties | 99% bacteria reduction (AATCC) | Prone to bacteria | Natural antibacterial | Traps odor-causing bacteria |
| Wash Durability | Maintains performance 300+ washes | Hardens after ~50 washes | Shrinks easily | Durable but pills |
| Temperature Range | Performs -20°C to 50°C | Poor when wet/cold | Felts in humidity | Sticks in heat |
| Sustainability | Recycled PET options available | Water-intensive | Biodegradable | Petroleum-based |
Application of Coolmax Fabric
Athletic Apparel
Sportswear: Jerseys, shorts, and compression wear
Running gear: Lightweight singlets and breathable base layers
Team uniforms: Moisture-managed fabrics for all-season play
Outdoor & Adventure Gear
Hiking apparel: Quick-drying shirts and pants
Cycling wear: Aerodynamic moisture-wicking jerseys
Ski underwear: Thermal regulation in cold conditions
Professional & Workwear
Healthcare scrubs: Antimicrobial moisture control
Hospitality uniforms: All-day comfort for staff
Industrial workwear: Temperature regulation in tough environments
Lifestyle & Casual Wear
Everyday t-shirts: Comfort in regular wear
Travel clothing: Odor-resistant properties
Underwear: Breathable daily comfort
Specialty Applications
Military gear: Extreme condition performance
Medical textiles: Patient comfort fabrics
Automotive interiors: Breathable seat technology
◼ Guide to the Best Laser Power for Cutting Fabrics
In this video
We can see that different laser cutting fabrics require different laser cutting powers and learn how to choose laser power for your material to achieve clean cuts and avoid scorch marks.
Laser Cut Coolmax Fabric: Process&Key Features
Process:
Coolmax Compatibility
Flatten fabric; use backing paper for stability.
Ensure ventilation (toxic fumes).
Equipment Settings
Set the appropriate wattage according to the specific fabric
Always run test cuts on scrap fabric to fine-tune settings.
Cutting Process
Check edges for clean cuts (no excessive melting).
Remove soot/debris gently.
Key Features:
Clean, Sealed Edges – Prevents fraying without additional finishing
High Precision – Cuts complex shapes with ±0.1mm accuracy
Fast & Automated – Cuts at 10-20m/min with minimal material waste
No Damage to Fabric – Uses controlled laser settings to preserve moisture-wicking function
To get the most out of cutting CoolMax with your laser, I'll share a few key tips to ensure it's always safe, clean, and efficient.
Laser Cut Coolmax: Essential Safety & Setup
Safety & Precautions:
①Dust & Fumes
Cutting synthetic fabrics like Coolmax generates fine particulates and fumes. Always operate with adequate ventilation and a dedicated fume extraction system to protect operator health and equipment.
②Melting & Burning
Polyester-based fabrics are prone to melting or charring with excessive heat. To prevent this, begin with conservative power settings and always conduct a test cut on scrap material first.
Optimization Tips:
①Ventilation & Extraction
For optimal air quality and cut consistency, use both general ventilation and a laser-specific fume extractor. This combination removes harmful gases and captures particles, keeping your workspace safe and your lens clean.
②Test Cuts Are Crucial
Never skip the test cut. Experimenting with speed and power settings on a fabric scrap is the only reliable way to achieve a clean, sealed edge without thermal damage.
③Cutting Denser Fabrics
When working with heavier-weight Coolmax, consider using multiple passes at a lower power setting. This technique minimizes heat buildup and yields a cleaner edge than a single, high-power pass.
Recommended Laser Machines For Coolmax Fabric
◼ Laser Engraving & Marking Machine
| Working Area (W * L) | 1600mm * 1000mm (62.9” * 39.3 ”) |
| Collecting Area (W * L) | 1600mm * 500mm (62.9'' * 19.7'') |
| Software | Offline Software |
| Laser Power | 100W / 150W / 300W |
| Laser Source | CO2 Glass Laser Tube or CO2 RF Metal Laser Tube |
| Mechanical Control System | Belt Transmission & Step Motor Drive / Servo Motor Drive |
| Working Table | Conveyor Working Table |
| Max Speed | 1~400mm/s |
| Acceleration Speed | 1000~4000mm/s2 |
◼ Laser Cutting Machines
• Laser Power: 100W/150W/300W
• Working Area: 1600mm * 1000mm (62.9” * 39.3 ”)
• Laser Power: 100W/150W/300W
• Working Area: 1600mm * 1000mm (62.9” * 39.3 ”)
What Are You Gonna Make with Coolmax Fabric Laser Machine?
FAQs
Coolmax® is a high-performance polyester fabric engineered to keep you dry and comfortable. Its unique four-channel fiber structure actively pulls moisture away from skin and accelerates evaporation, working 5x faster than cotton.
Coolmax® outperforms cotton for active use by moving sweat 15x faster (0.8s vs 12s), keeping skin 3°C cooler during exercise with 99% odor resistance, while cotton absorbs moisture, promotes bacteria, and degrades faster - proven by NASA's use in space tech, though cotton remains preferable for dry, casual wear.
COOLMAX® technology is not a fabric or a finished garment in itself, but rather an advanced performance fiber engineered to be integrated with other materials. By blending COOLMAX® fibers with additional yarns or fabrics, manufacturers create apparel that actively enhances wearer comfort through superior moisture management—effectively wicking sweat away from the skin and accelerating evaporation. This results in a noticeable cooling effect and rapid drying, making it especially suitable for activewear, sportswear, and everyday clothing where breathability and comfort are key.
Coolmax® is a patented high-performance moisture-wicking fabric originally developed by INVISTA (formerly DuPont), featuring unique four-channel polyester fibers that dry 5x faster than cotton, and is licensed by major sportswear brands like Nike and Under Armour - while comparable alternatives include Nike's Dri-FIT, Adidas' Climalite, and Under Armour's HeatGear, with Coolmax® EcoMade offering a sustainable recycled version.
Coolmax® doesn't provide direct insulation but enhances warmth in cold weather by keeping skin dry (drying 5x faster than cotton), preventing sweat-induced chill - making it ideal as a moisture-wicking base layer when paired with insulating materials like wool, as demonstrated by its use in U.S. Army cold-weather gear.
Coolmax® is the top breathable performance fabric (dries 5x faster than cotton), while linen offers best natural airflow, Outlast® adapts to temperature swings, and Tencel™ provides eco-friendly cooling - with NASA studies proving synthetics like Coolmax® lower skin temperature by 2-3°C during activity.
