2022 China New Design Wood Die Cutter - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser
2022 China New Design Wood Die Cutter - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser Detail:
(High-Power Laser Cleaner for Metal and Non-metal)
Technical Data
|
Laser Power |
1000W |
1500W |
2000W |
3000W |
|
Clean Speed |
≤20㎡/hour |
≤30㎡/hour |
≤50㎡/hour |
≤70㎡/hour |
|
Voltage |
Single phase 220/110V, 50/60HZ |
Single phase 220/110V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
|
Fiber Cable |
20M |
|||
|
Wavelength |
1070nm |
|||
|
Beam Width |
10-200mm |
|||
|
Scanning Speed |
0-7000mm/s |
|||
|
Cooling |
Water cooling |
|||
|
Laser Source |
CW Fiber |
|||
How to Find the Best Laser Cleaner for you?
Why not Customise it to your Requirements?
* Single Mode / Optional Multi-Mode:
Single Galvo head or double Galvo heads option, allowing the machine to emit light flecks of different shapes
Superiority of CW Fiber Laser Cleaner
▶ Cost-effectiveness
Continuous wave fiber laser cleaners can clean larger size of areas such as building facilities, and metal pipes. Higher speed and steady laser output ensure high repetition for mass cleaning. Plus, no consumables and low maintenance costs enhance the competition in cost-effectiveness.
▶ Lightweight Design
The continuous wave handheld laser cleaner adopts special lightweight materials, greatly reducing the laser gun weight. That’s convenient for operators to use for a long time, especially for cleaning large metal construction. Precise cleaning location and angle are easy to realize with the light laser cleaner gun.
▶ Multi-function
Tunable laser power, scanning shapes, and other parameters allow the laser cleaner to flexibly clean different pollutes on various base materials. It can remove resin, paint, oil, stains, rust, coating, plating, and oxide layers that are widely found in ships, auto repair, rubber molds, injection molds, high-end machine tools, and rails cleaning. This is an absolute advantage that any other traditional cleaning method does not have.
▶ Optimized Design
A sturdy laser cleaner cabinet covers four parts: fiber laser source, water chiller, handheld laser cleaner gun, and digital control system. Compact machine size but strong structure body is qualified in various working environments and laser cleaning for different materials. The optical fiber cable has a low energy consumption and can be customized in length. The optimized optical path design enhances movement stability and reliability during cleaning.
▶ Environmentally Friendly
Laser cleaning in an environmental treatment on metal and non-metal surfaces. Due to no consumables for chemicals, or grinding tools, the investment and cost are lower compared with traditional cleaning methods. Laser cleaning does not produce dust, fumes, residues, or particles thanks to the extraction and filtration from the fume extractor.
(Further Improve Production and Benefits)
Upgrade Options
3 In 1 Laser Welding, Cutting and Cleaning Gun
Fume Extractor
With one Simple Upgrade
Turning One Purchase into Three Machines Worth of Functions
Want to Learn More about This?
Samples of CW Laser Cleaning
Large Facilities Cleaning: ship, automotive, pipe, rail
Mold Cleaning: rubber mold, composite dies, metal dies
Surface Treatment: hydrophilic treatment, pre-weld and post-weld treatment
Paint removal, dust removal, grease removal, rust removal
Others: urban graffiti, printing roller, building exterior wall
Will your Material be Cleaned with Our Laser Cleaner?
Why Guess, When you can Ask Us!
How to Perform the Laser Cleaning Appropriately – 4 Methods
Various Laser Cleaning Ways
◾ Dry Cleaning
– Use the pulse laser cleaning machine to directly remove rust on the metal surface.
◾ Liquid Membrane
– Soak the workpiece in the liquid membrane, then use the laser cleaning machine for decontamination.
◾ Noble Gas Assist
– Target the metal with the laser cleaner while blowing the inert gas onto the substrate surface. When the dirt is removed from the surface, it will be blown off immediately to avoid further surface contamination and oxidation from the smoke.
◾ Noncorrosive Chemical Assist
– Soften the dirt or other contaminants with the laser cleaner, then use the noncorrosive chemical liquid to clean (commonly used for cleaning stone antiques).
Comparison: Laser Cleaning VS Other Cleaning Methods
| Laser Cleaning | Chemical Cleaning | Mechanical Polishing | Dry Ice Cleaning | Ultrasonic Cleaning | |
| Cleaning Method | Laser, non-contact | Chemical solvent, direct contact | Abrasive paper, direct contact | Dry ice, non-contact | Detergent, direct-contact |
| Material Damage | No | Yes, but rarely | Yes | No | No |
| Cleaning Efficiency | High | Low | Low | Moderate | Moderate |
| Consumption | Electricity | Chemical Solvent | Abrasive Paper/ Abrasive Wheel | Dry Ice | Solvent Detergent |
| Cleaning Result | spotlessness | regular | regular | excellent | excellent |
| Environmental Damage | Environmental Friendly | Polluted | Polluted | Environmental Friendly | Environmental Friendly |
| Operation | Simple and easy to learn | Complicated procedure, skilled operator required | skilled operator required | Simple and easy to learn | Simple and easy to learn |
Related Laser Cleaning Machine
Pulse Laser Cleaner
Rust Laser Remover
Non-metal Laser Cleaner
Videos about Laser Cleaning
to Help Better Understand the Rust Cleaning Process
What is Laser Cleaning & How it Works?
Laser Ablation is Better at Rust Cleaning
Want to Learn More about Laser Cleaner?
Here are some Laser-Knowledge you Might be Interested in
Do Laser Cleaning Machines Really Work? [How to Choose in 2024]
Does Laser Rust Removal Really Work?
Laser Paint Stripper in 2024 [Everything You Want to Know About]
Any Purchase should be Well-Informed
We Can Provide Additional Information and Consultation
Product detail pictures:
Related Product Guide:
We insist on offering high-quality creation with superior business enterprise concept, honest revenue plus the greatest and fast service. it will bring you not only the high quality solution and huge profit, but essentially the most significant is usually to occupy the endless market for 2022 China New Design Wood Die Cutter - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser , The product will supply to all over the world, such as: Hongkong , Muscat , France , With the growing of the company, now our products sold and served at more than 15 countries around the world,such as Europe,North America,Middle-east,South America,Southern Asia and so on. As we bear in our mind that innovation is essential to our growth, new product development is constantly.Besides, Our flexible and efficient operation strategies,High quality products and competitive prices are exactly what our customers are looking for. Also a considerable service brings us good credit reputation.
By Margaret
from Barcelona
- 2017.03.28 16:34
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
By Sharon
from Wellington
- 2017.08.16 13:39
Related PRODUCTS
-
China Wholesale Fiber Laser Marking Machine Fac...
-
China Wholesale Laser Engraver And Cutter Manuf...
-
China Wholesale Laser Cutting Machine For Metal...
-
China Wholesale Flatbed Laser Cutter Machine Wo...
-
China Wholesale Laser Cut Lgp Quotes Pricelist ...
-
China Wholesale Laser Cut Nylon Manufacturers S...