China Wholesale Flatbed Fiber Laser Cutter For Sale Factories Pricelist - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser
China Wholesale Flatbed Fiber Laser Cutter For Sale Factories Pricelist - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser Detail:
(High-Power Laser Cleaner for Metal and Non-metal)
Technical Data
|
Laser Power |
1000W |
1500W |
2000W |
3000W |
|
Clean Speed |
≤20㎡/hour |
≤30㎡/hour |
≤50㎡/hour |
≤70㎡/hour |
|
Voltage |
Single phase 220/110V, 50/60HZ |
Single phase 220/110V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
|
Fiber Cable |
20M |
|||
|
Wavelength |
1070nm |
|||
|
Beam Width |
10-200mm |
|||
|
Scanning Speed |
0-7000mm/s |
|||
|
Cooling |
Water cooling |
|||
|
Laser Source |
CW Fiber |
|||
How to Find the Best Laser Cleaner for you?
Why not Customise it to your Requirements?
* Single Mode / Optional Multi-Mode:
Single Galvo head or double Galvo heads option, allowing the machine to emit light flecks of different shapes
Superiority of CW Fiber Laser Cleaner
▶ Cost-effectiveness
Continuous wave fiber laser cleaners can clean larger size of areas such as building facilities, and metal pipes. Higher speed and steady laser output ensure high repetition for mass cleaning. Plus, no consumables and low maintenance costs enhance the competition in cost-effectiveness.
▶ Lightweight Design
The continuous wave handheld laser cleaner adopts special lightweight materials, greatly reducing the laser gun weight. That’s convenient for operators to use for a long time, especially for cleaning large metal construction. Precise cleaning location and angle are easy to realize with the light laser cleaner gun.
▶ Multi-function
Tunable laser power, scanning shapes, and other parameters allow the laser cleaner to flexibly clean different pollutes on various base materials. It can remove resin, paint, oil, stains, rust, coating, plating, and oxide layers that are widely found in ships, auto repair, rubber molds, injection molds, high-end machine tools, and rails cleaning. This is an absolute advantage that any other traditional cleaning method does not have.
▶ Optimized Design
A sturdy laser cleaner cabinet covers four parts: fiber laser source, water chiller, handheld laser cleaner gun, and digital control system. Compact machine size but strong structure body is qualified in various working environments and laser cleaning for different materials. The optical fiber cable has a low energy consumption and can be customized in length. The optimized optical path design enhances movement stability and reliability during cleaning.
▶ Environmentally Friendly
Laser cleaning in an environmental treatment on metal and non-metal surfaces. Due to no consumables for chemicals, or grinding tools, the investment and cost are lower compared with traditional cleaning methods. Laser cleaning does not produce dust, fumes, residues, or particles thanks to the extraction and filtration from the fume extractor.
(Further Improve Production and Benefits)
Upgrade Options
3 In 1 Laser Welding, Cutting and Cleaning Gun
Fume Extractor
With one Simple Upgrade
Turning One Purchase into Three Machines Worth of Functions
Want to Learn More about This?
Samples of CW Laser Cleaning
Large Facilities Cleaning: ship, automotive, pipe, rail
Mold Cleaning: rubber mold, composite dies, metal dies
Surface Treatment: hydrophilic treatment, pre-weld and post-weld treatment
Paint removal, dust removal, grease removal, rust removal
Others: urban graffiti, printing roller, building exterior wall
Will your Material be Cleaned with Our Laser Cleaner?
Why Guess, When you can Ask Us!
How to Perform the Laser Cleaning Appropriately – 4 Methods
Various Laser Cleaning Ways
◾ Dry Cleaning
– Use the pulse laser cleaning machine to directly remove rust on the metal surface.
◾ Liquid Membrane
– Soak the workpiece in the liquid membrane, then use the laser cleaning machine for decontamination.
◾ Noble Gas Assist
– Target the metal with the laser cleaner while blowing the inert gas onto the substrate surface. When the dirt is removed from the surface, it will be blown off immediately to avoid further surface contamination and oxidation from the smoke.
◾ Noncorrosive Chemical Assist
– Soften the dirt or other contaminants with the laser cleaner, then use the noncorrosive chemical liquid to clean (commonly used for cleaning stone antiques).
Comparison: Laser Cleaning VS Other Cleaning Methods
| Laser Cleaning | Chemical Cleaning | Mechanical Polishing | Dry Ice Cleaning | Ultrasonic Cleaning | |
| Cleaning Method | Laser, non-contact | Chemical solvent, direct contact | Abrasive paper, direct contact | Dry ice, non-contact | Detergent, direct-contact |
| Material Damage | No | Yes, but rarely | Yes | No | No |
| Cleaning Efficiency | High | Low | Low | Moderate | Moderate |
| Consumption | Electricity | Chemical Solvent | Abrasive Paper/ Abrasive Wheel | Dry Ice | Solvent Detergent |
| Cleaning Result | spotlessness | regular | regular | excellent | excellent |
| Environmental Damage | Environmental Friendly | Polluted | Polluted | Environmental Friendly | Environmental Friendly |
| Operation | Simple and easy to learn | Complicated procedure, skilled operator required | skilled operator required | Simple and easy to learn | Simple and easy to learn |
Related Laser Cleaning Machine
Pulse Laser Cleaner
Rust Laser Remover
Non-metal Laser Cleaner
Videos about Laser Cleaning
to Help Better Understand the Rust Cleaning Process
What is Laser Cleaning & How it Works?
Laser Ablation is Better at Rust Cleaning
Want to Learn More about Laser Cleaner?
Here are some Laser-Knowledge you Might be Interested in
Do Laser Cleaning Machines Really Work? [How to Choose in 2024]
Does Laser Rust Removal Really Work?
Laser Paint Stripper in 2024 [Everything You Want to Know About]
Any Purchase should be Well-Informed
We Can Provide Additional Information and Consultation
Product detail pictures:
Related Product Guide:
We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for China Wholesale Flatbed Fiber Laser Cutter For Sale Factories Pricelist - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser , The product will supply to all over the world, such as: Greece , kazan , South Korea , Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Elsie
from Rwanda
- 2018.05.15 10:52
It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
By Jane
from Orlando
- 2017.08.18 18:38
Related PRODUCTS
-
China Wholesale Laser Cut Sportswear Factories ...
-
China Wholesale Flatbed Laser Quotes Pricelist ...
-
China Wholesale Laser Machine To Cut Acrylic Ma...
-
China Wholesale Contour Cutting Laser Cutter Vi...
-
China Wholesale Laser Cut Waterproof Fabric Fac...
-
China Wholesale Dual Heads Vision Laser Cutter ...