China Wholesale Cutting Acrylic With Laser Factories Pricelist - 300W Laser Cutting Machine – MimoWork Laser

SPECIFICATIONS

HIGHLIGHTS

WATCH VIDEO

INDUSTRY

RELATED PRODUCTS

(laser wood engraver, acrylic laser engraver, leather laser engraver)

Technical Data

* More sizes of laser working table are customized

(Flatbed laser cutter machine 130)

Multifunction in One Machine

Ball & Screw

A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. They are made to close tolerances and are therefore suitable for use in situations in which high precision is necessary. The ball assembly acts as the nut while the threaded shaft is the screw. In contrast to conventional lead screws, ball screws tend to be rather bulky, due to the need to have a mechanism to re-circulate the balls. The ball screw ensures high speed and high precision laser cutting.

Servo Motors

A servomotor is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is a signal (either analog or digital) representing the position commanded for the output shaft. The motor is paired with some type of position encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero, and the motor stops. Servo motors ensure higher speed and higher precision of the laser cutting and engraving.

Mixed Laser Head

A mixed laser head, also known as a metal non-metallic laser cutting head, is a very important part of the metal & non-metal combined laser cutting machine. With this professional laser head, you can cut both metal and non-metal materials. There is a Z-Axis transmission part of the laser head that moves up and down to track the focus position. Its double drawer structure enables you to put two different focus lenses to cut the materials of different thicknesses without adjustment of focus distance or beam alignment. It increases cutting flexibility and makes the operation very easy. You can use different assist gas for different cutting jobs.

Auto Focus

It is mainly used for metal cutting. You may need to set a certain focus distance in the software when the cutting material is not flat or with different thickness. Then the laser head will automatically go up and down, keeping the same height & focus distance to match with what you set inside the software to achieve a consistently high cutting quality.

Any questions about the laser options and flatbed laser cutter structure?

Inquire us

▶ FYI: The Flatbed Laser Cutter Machine 130 is suitable to cut and engrave on solid materials such as acrylic and wood. Honey comb working table and knife strip cutting table can carry the materials and help to reach best the cutting effect without dust and fume that can be sucked into and purified.

<a href="https://www.mimowork.com/working-table/" title=">> Discover laser cutting tables” target=”_blank”>
>> Discover laser cutting tables

<a href="https://www.mimowork.com/fume-extractor/" title=">> Discover laser fume extractor” target=”_blank”>
>> Discover laser fume extractor

Video of Laser Cutting Acylic (PMMA)

Proper and right laser power guarantees heat energy uniformly melts through acrylic materials. Precise cutting and fine laser beams create unique acrylic artwork with a flame-polished edge. Laser is the ideal tool to process acrylic.

Video of Laser Engraving Wood Board

Wood can be easily worked on laser and its tenacity makes it suitable to apply to many applications. You can make so many sophisticated creatures out of wood. What’s more, due to the fact of thermal cutting, the laser system can bring exceptional design elements in wood products with dark-colored cutting edges and brownish-colored engravings.

Fields of Application

Laser Cutting for Your Industry

Laser Photo Engraving

Crystal surface and exquisite engraving details

✔ Bringing about more economical and environment-friendly manufacturing process

✔ Customized patterns can be engraved whether for pixel and vector graphic files

✔ Quick response to market from samples to large-lot production

Learn More

Advertising & Gifts

Unique advantages of laser cutting signs & decorations

✔ Clean and smooth edges with thermal melting when processing

✔ No limitation on shape, size, and pattern realizes flexible customization

✔ Customized laser tables meet requirements for varieties of materials formats

Learn More

Common materials and applications

of Flatbed Laser Cutter 130

Materials: Acrylic, Wood, Paper, Plastic, Glass, MDF, Plywood, Laminates, Leather, and other Non-metal Materials

Applications: Signs(signage), Crafts, Jewelry, Key chains, Arts, Awards, Trophies, Gifts, etc.

View more materials


View more applications

We’ve customized the flatbed laser cutter for dozens of clients
Add yourself to the list!

Contact Us