Home > Laser Products > Flatbed Laser Cutting Machine

Flatbed Laser Cutter 130

  • Flatbed Laser Cutter 130
  • Flatbed Laser Cutter 130
product description

The Mimowork's Flatbed Laser Cutter 130 is mainly for cutting and engraving. You can choose different working platforms for different materials. This model is especially designed for signs & furniture industry. With the mixed laser cutting head & auto focus, besides for regular non-metal cutting, you can also use it for thin metal cutting. If you need high precision, you can choose the ball screw transmission & servo motor.


Process Materials: Acrylic, Abs, Glass, Fabric, Laminates, Leather, Paper, Plastic, Wood and other Non-metal Materials, Mild Steel, Stainless Steel


Application: Signs, Arts, Crafts, Awards, Trophies, Gifts and many others



Working Area (W *L)1300mm * 900mm (51” * 35.4 ”)
SoftwareOffline Software
Laser Power150W/300W/500W
Laser SourceCO2 Glass Laser Tube or CO2 RF Metal Laser Tube
Mechanical Control SystemStep Motor Belt Control
Working TableHoney Comb Working Table or Knife Strip Working Table
Max Speed1~400mm/s
Acceleration Speed1000~4000mm/s2

Highlights of FLATBED LASER CUTTER 130:


A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. They are made to close tolerances and are therefore suitable for use in situations in which high precision is necessary. The ball assembly acts as the nut while the threaded shaft is the screw. In contrast to conventional lead screws, ball screws tend to be rather bulky, due to the need to have a mechanism to re-circulate the balls. The ball screw ensures high speed and high precision laser cutting.


A servomotor is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is a signal (either analogue or digital) representing the position commanded for the output shaft. The motor is paired with some type of position encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero, and the motor stops. Servo motors ensure higher speed and higher precision of the laser cutting and engraving.


Mixed laser head, also known as metal non-metallic laser cutting head, is a very important part of the metal & non-metal combined laser cutting machine. With this professional laser head, you can use it to cut metal and non-metal. There is a Z-Axis transmission part of the laser head which a move up and down to track the focus position. It uses a double drawer structure where you can put two different focus lenses to cut the materials with different thicknesses without adjustment of focus distance or beam alignment. It increases cutting flexibility and makes the operation very easy.  You can use different assist gas for different cutting jobs.


It is mainly used for the metal cutting; the metal is conductive, you can set the certain focus distance in the software when your metal is not flat or with different thickness, the laser head will automatically go up and down to keep the same height & focus distance to match with what you set inside the software.