Die Board Cutting Machine Factory - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser
Die Board Cutting Machine Factory - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser Detail:
(high-power laser cleaner for metal and non-metal)
Technical Data
|
Laser Power |
1000W |
1500W |
2000W |
3000W |
|
Clean Speed |
≤20㎡/hour |
≤30㎡/hour |
≤50㎡/hour |
≤70㎡/hour |
|
Voltage |
Single phase 220/110V, 50/60HZ |
Single phase 220/110V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
Three phase 380/220V, 50/60HZ |
|
Fiber Cable |
20M |
|||
|
Wavelength |
1070nm |
|||
|
Beam Width |
10-200nm |
|||
|
Scanning Speed |
0-7000mm/s |
|||
|
Cooling |
Water cooling |
|||
|
Laser Source |
CW Fiber |
|||
* Sigle Mode / Optional Multi-Mode:
Single galvo head or double galvo heads option, allowing the machine to emit light flecks of different shapes
Selecting a suitable laser cleaning configuration?
Superiority of CW Fiber Laser Cleaner
▶ Cost-effectiveness
Continuous wave fiber laser cleaner has the ability to clean larger size of areas such as building facilities, and metal pipes. Higher speed and steady laser output ensure high repetition for mass cleaning. Plus, no consumables and low maintenance costs enhance the competition in cost-effectiveness.
▶ Lightweight Design
The continuous wave handheld laser cleaner adopts special lightweight materials, greatly reducing the laser gun weight. That’s convenient for operators to use for a long time especially for cleaning large metal construction. Precise cleaning location and angle are easy to realize with the light laser cleaner gun.
▶ Multi-function
Tunable laser power, scanning shapes and other parameters allow the laser cleaner to flexibly clean different pollutes on various base materials. It can remove resin, paint, oil, stains, rust, coating, plating and oxide layer that are widely used in ships, auto repair, rubber molds, injection molds, high-end machine tools, and rails cleaning. This is an absolute advantage that any other traditional cleaning method does not have.
▶ Optimized Design
A sturdy laser cleaner cabinet covers the important four parts: fiber laser source, water chiller, handheld laser cleaner gun, and digital control system. Compact machine size but strong structure body is qualified in various working environments and laser cleaning for different materials. The optical fiber cable has a low energy consumption and can be customized in length. And the optimized optical path design enhances movement stability and reliability during cleaning
▶ Environmentally Friendly
Laser cleaning in an environmental treatment on metal and non-metal surfaces. Due to no consumables for chemicals, or grinding tools, the investment and cost are lower compared with traditional cleaning methods. And laser cleaning does not produce dust, fume, residues, or particles thanks to the extraction and filtration from the fume extractor.
(Further improve production and benefits)
Upgrade Options
3 In 1 Laser Welding, Cutting and Cleaning Gun
Fume Extractor
Boost your cleaning efficiency and quality with the CW laser cleaner with high power
⇨ How to pick one suitable laser solution
Samples of CW Laser Cleaning
Large Facilities Cleaning: ship, automotive, pipe, rail
Mold Cleaning: rubber mold, composite dies, metal dies
Surface Treatment: hydrophilic treatment, pre-weld and post-weld treatment
Paint removal, dust removal, grease removal, rust removal
Others: urban graffiti, printing roller, building exterior wall
▶ Send your materials and demands to us
MimoWork will help you with material testing and laser cleaning guide !
How to perform the laser cleaning appropriately – 4 Methods
Various Laser Cleaning Ways
◾ Dry Cleaning
– Use the pulse laser cleaning machine to directly remove rust on the metal surface
◾ Liquid Membrane
– Soak the workpiece in the liquid membrane, then use the laser cleaning machine for decontamination
◾ Noble Gas Assist
– Target the metal with the laser cleaner while blowing the inert gas onto the substrate surface. When the dirt is removed from the surface, it will be blown off immediately to avoid further surface contamination and oxidation from the smoke
◾ Noncorrosive Chemical Assist
– Soften the dirt or other contaminant with the laser cleaner, then use the noncorrosive chemical liquid to clean (commonly used for cleaning stone antiques)
Comparison: laser cleaning VS other cleaning methods
| Laser Cleaning | Chemical Cleaning | Mechanical Polishing | Dry Ice Cleaning | Ultrasonic Cleaning | |
| Cleaning Method | Laser, non-contact | Chemical solvent, direct contact | Abrasive paper, direct contact | Dry ice, non-contact | Detergent, direct-contact |
| Material Damage | No | Yes, but rarely | Yes | No | No |
| Cleaning Efficiency | High | Low | Low | Moderate | Moderate |
| Consumption | Electricity | Chemical Solvent | Abrasive Paper/ Abrasive Wheel | Dry Ice | Solvent Detergent |
| Cleaning Result | spotlessness | regular | regular | excellent | excellent |
| Environmental Damage | Environmental Friendly | Polluted | Polluted | Environmental Friendly | Environmental Friendly |
| Operation | Simple and easy to learn | Complicated procedure, skilled operator required | skilled operator required | Simple and easy to learn | Simple and easy to learn |
Related Laser Cleaning Machine
Pulse Laser Cleaner
Rust Laser Remover
Non-metal Laser Cleaner
Any questions about the laser cleaner machine price
Product detail pictures:
Related Product Guide:
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Die Board Cutting Machine Factory - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser , The product will supply to all over the world, such as: Berlin, Russia, New Delhi, We expect to provide products and services to more users in global aftermarket markets; we launched our global branding strategy by providing our excellent products all over the world by virtue of our well reputed partners letting global users keep pace with technology innovation and achievements with us.
By Prudence from Greek - 2017.06.25 12:48
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Sophia from Swedish - 2017.01.11 17:15
Related PRODUCTS
-
China Wholesale Laser Cut Cordura Manufacturers...
-
China Wholesale Laser Marking Machine Manufactu...
-
China Wholesale High Speed Contour Laser Cuttin...
-
China Wholesale Galvo Laser Marker Usa Manufact...
-
China Wholesale Flatbed Laser Cutter Machine Sp...
-
China Wholesale Laser Cut Tag Factories Quotes ...
