Commercial Laser Cutter for Fabric

Large Format Laser Cutter for Commercial Fabric Cutting

 

The Mimowork’s Flatbed Laser Cutter 250L is R&D for wide textile rolls and soft materials, especially for dye-sublimation fabric and technical textiles. The 98”  width cutting table can be applied to most of the typical fabric rolls. Diverse vision systems are designed for different industrial and commercial fabrics and applications, helping you cut smartly. The vacuum-sucking function ensures materials are flat on the table. With the MimoWork Auto Feeder system, the material will be fed directly and endlessly from the roll without any further manual operation. Also, the optional ink-jet print head is available for subsequent processing.

 

 


Product Detail

Product Tags

▶ Commercial fabric cutting machine with laser

Technical Data

Working Area (W * L) 2500mm * 3000mm (98.4’’ *118’’)
Max Material Width 98.4’’
Software Offline Software
Laser Power 150W/300W/450W
Laser Source CO2 Glass Laser Tube or CO2 RF Metal Laser Tube
Mechanical Control System Rack and Pinion Transmission & Servo Motor   Drive
Working Table Mild Steel Conveyor Working Table
Max Speed 1~600mm/s
Acceleration Speed 1000~6000mm/s2

Mechanical Structure

▶ High Efficiency & High Output

The working area of 2500mm * 3000mm (98.4’’ *118’’) can carry more materials at one time. Plus with the dual laser heads and conveyor table, automatic conveying and continuous cutting speed up the production process.

▶ Excellent Cutting Quality

The servo motor features high levels of torque at high speed. It can deliver higher precision on position the gantry and the laser head than the stepper motor does.

- High power

To meet more strict demands for large formats and thick materials, the industrial fabric laser cutting machine is equipped with high laser powers of 150W/300W/500W. That is favorable to some composite materials and resistant outdoor equipment cutting.

▶ Safe & Stable Structure

- Signal light

Due to the automatic processing of our laser cutters, it is often the case that the operator is not at the machine. A signal light would be an indispensable part that can show and remind the operator of the working condition of the machine. Under the normal working condition, it shows a green signal. When the machine finishes working and stops, it would turn yellow. If the parameter is abnormally set or there’s improper operation, the machine will stop and a red alarm light will be issued to remind the operator.

laser cutter signal light
laser machine emergency button

- Emergency button

When the improper operation causes some emergent risk to one’s safety, this button can be pushed down and cut off the machine power immediately. When everything’s clear, only releasing the emergency button, then switching on the power can make the machine power on back to work.

- Safe circuit

Circuits are an important part of the machinery, which guarantees the operators’ safety and machines’ normal operation. All circuit layouts of our machines are using CE & FDA standard electrical specifications. When there comes to be an overload, short circuit, etc., our electronic circuit prevents malfunction by stopping the flow of current.

safe-circuit

Under the working table of our laser machines, there is a vacuum suction system, which is connected to our powerful exhausting blowers. Besides the great effect of smoke exhausting, this system would provide good adsorption of the materials that are put on the working table, as a result, the the thin materials especially fabrics are extremely flat during cutting.

R&D for Large Format Fabric Cutting

co2-lasers-diamond-j-2series_副本

CO2 RF Laser Source - Option

Combines power, excellent beam quality, and nearly square wave pulses (9.2 / 10.4 / 10.6μm) for high processing efficiency and speed. With small heat-affected zone, plus compact, fully sealed, slab discharge construction for enhanced reliability. For some special industrial fabrics, RF Metal Laser Tube will be a better option.

The Auto Feeder combined with the Conveyor Table is the ideal solution for series and mass production. It transports the flexible material (fabric most of the time) from the roll to the cutting process on the laser system. With stress-free material feeding, there is no material distortion while contactless cutting with laser ensures outstanding results.

When you are trying to cut a whole lot of different designs and want to save material to the largest degree, Nesting Software will be a good choice for you. By selecting all the patterns you want to cut and setting the numbers of each piece, the software will nest these pieces with the most usage rate to save your cutting time and roll materials. Simply send the nesting markers to the Flatbed Laser Cutter 160, it will cut uninterruptedly without any further manual intervention.

You can use the marker pen to make the marks on the cutting pieces, enabling the workers to sew easily. You can also use it to make special marks such as the serial number of the product, the size of the product, the manufacture date of the product, etc.

It is widely used commercially for marking and coding products and packages. A high-pressure pump directs liquid ink from a reservoir through a gun body and a microscopic nozzle, creating a continuous stream of ink droplets via the Plateau-Rayleigh instability. Different inks are optional for specific fabrics.

Fabric Samples

Video Display

Find more videos about our laser cutters at our Video Gallery

Cordura Fabric Laser Cutting

— protective vest

Cutting through the fabric at one time, no adhesion

No thread residue, no burr

Flexible cutting for any shapes and sizes

Pictures Browse

• Tent

• Kite

• Backpack

• Parachute

Resistant Clothing

• Protection Suit

Filter Cloth

Insulation Material

• Synthetic Fabric

• Work Cloths

• Bullet Proof Clothing

• Firefighter Uniform

industrial-fabric-01

Related Fabric Laser Cutters

• Laser Power: 100W / 150W / 300W

• Working Area (W *L): 1600mm * 1000mm

• Laser Power: 100W/150W/300W

• Working Area (W *L): 1800mm * 1000mm

• Laser Power: 150W/300W/450W

• Working Area (W *L): 1600mm * 3000mm

Learn more about commercial laser cutting machine price
Add yourself to the list!

  • Send your message to us:

    Write your message here and send it to us